Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 85914779721/A
e
Pyrolytic (on some models only)
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following the
usual cleaning instructions.
• Remove any food residues or large spills
from previous cooking operations from the
inside of the oven.
• Completely remove all accessories from
inside the oven.
• For very stubborn encrustations spray an
oven cleaning product onto the glass (read
the warnings on the product); leave for 60
minutes, then rinse and dry the glass using
kitchen roll or a microfibre cloth.
• If present, remove the temperature probe.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Select PYROLYTIC function .
The display shows the Pyrolytic function duration
(factory set to 2:00 hours).
3. Scroll with your finger to set the duration of
the Pyrolytic function from a minimum of
2:00 hours to maximum 3:00 hours.
4. Press the CONFIRM button to confirm
the selected duration.
The display shows the warning to remove all
accessories from the oven cavity before starting
the function.
On the right of the icon both the selected
duration for pyrolytic function (top) and the
expected end time of the function (bottom) are
displayed.
5. Press the START button to start the
pyrolytic function.
Approximately 1 minute after the Pyrolytic
function starts, the indicator light (in the
lower area ) comes on to indicate that the
door is locked by a device that prevents the
door from being opened.
At the end of the function, the appliance beeps
and the display returns to the main menu.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
See General safety instructions.
Pyrolytic cleaning is an automatic high-
temperature cleaning procedure which
causes dirt to dissolve. This process
makes it possible to clean the inside of
the oven very easily.
Available pyrolytic function durations:
• Light dirt: 2:00
• Medium dirt: 2:30
• Heavy dirt: 3:00
It is not possible to start the pyrolytic
function if the temperature probe (if
available) is plugged in and the icon
flashes.
It is not possible to select any function
once the door lock device has been
activated.
The door is locked until the temperature
inside the oven cavity returns to a safe
level.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
Loading ...
Loading ...
Loading ...