DWM-312 User Manual

Loading ...

46D-Link DWM-312 User Manual

Section 4 - Conguration

Select whether to Enable or Disable local SNMP administration.

Select whether to Enable or Disable remote SNMP administration.

Enter the password public in this eld to allow read-only access

to network administration using SNMP. You can view the network,

but no conguration is possible with this setting.

Enter the password private in this eld to enable read/write

access to the network using SNMP.

Enter up to 4 IP addresses to use as trap targets for your network.

Select the SNMP version of your system.

If you want to limit remote access SNMP access, enter the IP

address of the remote computer you will use to access this device;

all other IP addresses will be denied remote SNMP access.

Enter a contact point for the system for reference.

Enter the system name for reference.

Enter the system location for reference.

User Privacy Denition

User accounts can be dened for SNMP remote access. Click Edit

to change settings. Up to ve users can be added.

SNMP Local:

SNMP Remote:

Get Community:

Set Community:

IP 1/IP 2/IP 3/IP 4:

SNMP Version:

WAN Access IP

Address:

System Contact:

System Name:

System Location:

SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network

device to the administrator of the network. SNMP can be used to monitor trac and statistics of the DWM-312. The DWM-312 supports SNMP v1,

v2c, and v3. D-View software uses the SNMP protocol. For details on managing your device with D-View, see the D-View Manual.

SNMP

Loading ...

D-Link DWM-312 4G LTE M2M Router