Loading ...
Loading ...
Loading ...
The oven will not Allow the range to cool, and then reset
self<lean, the controls.
Excessive smoking
during a sel?
cleaning cycle.
The oven door will
not open after a
self-cleaning cycle.
The oven is not
clean after a self-
cleaning cycle.
Steam is coming
out of the vent.
The oven temperature is
too high to start a self-clean
operation.
The oven controls have been
set incorrectly.
A self-cleaning cycle cannot
be started if the oven lockout
feature has been activated or
if a radiant surface element is
on,
There is excessive soiling in
the oven.
The oven is too hot.
The oven controls were not
set correctly.
The oven was heavily soiled.
When using the convection
feature, it is normal to see
steam coming out of the oven
vent.
As the number of racks or
amount of food being cooked
increases,
A burning or oily
odor is coming
from the vent.
the amount of
visible steam will increase.
This is normal in a new oven
and will disappear in time.
See the section on self-cleaning on
page 5 i.
Deactivate the oven lockout (see page
49). Make sure all surface elements are
turned off.
Press OVEN OFF. Open the windows to
rid the room of smoke. Wait until the
self-cleaning cycle is cancelled. Wipe
up the excessive soil, and then start the
self-cleaning cycle again.
Allow the oven to cool.
See the section on self<leaning on
page 51.
Wipe up heavy spillovers before
starting the self-cleaning cycle. Heavily
soiled ovens may need to be sel?
cleaned again or for a longer period of
time.
This is normal operation, and not a
system failure. Use the oven as usual.
• To speed the process, set a self-
cleaning cycle for a minimum of
3 hours.
• See the section on self-cleaning on
page 51.
(continued)
English 67
NE59J7630SS_AA_DG68-00598A-01_EN.indd 67 2015-04-16 u_4:46:10
Loading ...
Loading ...
Loading ...