Loading ...
Loading ...
Loading ...
nuwavenow.com | 31
Cleaning
Before First Use
1. Remove all the packaging materials,
including any tape and labels on the
appliance.
2. Clean the Wire Rack, plug-in Grill,
Air Fry Basket, Baking and Drip
Pan thoroughly with hot water, a
nonabrasive sponge, and mild dish
detergent, or in the dishwasher, top
rack only.
3. Wipe the inside and outside of the
Pro-Smart Grill with a damp dishcloth
or wet cloth and dry thoroughly.
4. Only hand-wash the Probe.
After Each Use
1. Allow the Pro-Smart Grill to cool
completely before cleaning.
2. Always unplug the Pro-Smart Grill
from the electrical outlet prior to
cleaning. NEVER clean the Pro-Smart
Grill while it is plugged in.
3. Never use harsh abrasive or corrosive
cleaning products, as they may
damage the finish. Wipe the exterior
with a clean, damp cloth and dry
thoroughly. NEVER spray a solution
directly on the unit, especially the
control panel. Apply the cleanser
directly to a cloth towel.
4. Clean the interior with a damp cloth,
mild liquid soap, and a clean cloth.
5. Never use steel wool pads, etc., When
cleaning the unit.
6. NEVER HANDLE A HOT GRILL. Allow
the plug-in Grill to completely cool
before cleaning, then wipe it with a
clean damp towel and rinse it in cool
water. Dry it completely. WARNING:
NEVER submerge or rinse a HOT Grill
in water as it may warp or break.
7. With the glass window cool, spray glass
cleaner on a clean cloth towel. Clean the
inside and outside of the window. Use
a damp cloth to rinse and then dry the
window with a clean towel.
8. Never operate the Pro-Smart Grill
without the Baking and Drip Pan in
place.
9. To remove baked-on grease, soak
the Wire Rack, plug-in Grill, Air Fry
Basket, and/or Baking and Drip Pan,
in hot, soapy water for a minimum of
10 minutes. Dry thoroughly.
IMPORTANT: Do not immerse the unit
in water or attempt to put it through the
dishwasher. Make sure it has cooled
completely prior to cleaning.
Storage
• Unplug the Pro-Smart Grill and let it
cool down completely.
• Make sure that all parts are clean and
dry.
• Never wrap the cord around the Pro-
Smart Grill.
Replacing the Light Bulb
Make sure to turn off and unplug the unit,
and allow the interior to fully cool before
replacing the light bulb. Failure to do so
could result in burns or damage to the glass
cover or the light bulb itself. Unscrew the light
bulb cover and the light bulb.
To order the light bulb, call Customer
Service at 1-877-689-2838 or emailing
help@nuwavenow.com. Use part number
BGP1. The light bulb can be found at your
local hardware store. The bulb used is an
incandescent light bulb 25W–120/125 Volt
-T6 E14 screw base.
CLEANING & MAINTENANCE
Loading ...
Loading ...
Loading ...