Loading ...
Loading ...
Loading ...
8
Simple assembly is required to use this fan.
1.
Align Cradle Base (packed separately) with support brackets attached
to fan body sides. Note: you may need to flex the parts to make them
align properly.
2.
Insert support bracket into the opening of Cradle Base. Press spring
loaded button down to allow it to insert into the Cradle Base (Fig 1).
3.
Press the support bracket into the Cradle Base until the spring button
protrudes out the open hole in Cradle Base (Fig. 2).
4.
Repeat above process for opposite side of fan
CAUTION: Before cleaning the fan be sure to disconnect power cord from the
plug. Clean the grille surface with a clean damp cloth. Do not use harsh
chemical or abrasive cleaners. DO NOT SUBMERGE THE FAN OR ANY WIRES IN
WATER. Replace front grille before fan use. Allow the fan to dry completely
before use. Periodic grille cleaning with a vacuum will prevent dust build up.
The motor is sealed and does not require any interior maintenance, cleaning or
lubrication.
The internal motor bearings are permanently lubricated at the factory and do
not require any additional lubrication.
FAN CRADLE ASSEMBLY
CLEANING & MAINTENANCE
TAKING CARE OF YOUR PRODUCT
Loading ...
Loading ...
Loading ...