Loading ...
Loading ...
Loading ...
RHAP1001 Revision 2.1
PARTS
ASSEMBLY & FILTER INSTALLATION
OPERATING INSTRUCTIONS
1. Air Purifier
Unit
2. HEPA Filter
3. Purifier Base
Your air purifier comes pre-assembled in the box,
requiring just to be plugged in.
To change the filter, remove the base of the air
purifier.
Remove the old filter from the appliance.
Take the new filter out of any protective sleeves or
packaging.
Install the new filter in the air purifier.
Refit the base to the air purifier.
Press the Power button to switch
on the Air Purifier. It will emit a
beep, and the machine will begin
operating.
To turn off, press the Power
button again and the lights will
turn off.
Press the timer button to select
between 2 hours, 4 hours, 8
hours, or TIMER OFF.
When the air purifier is switched on, press the
Fan Speed button to control the operating speed.
The purifier operates in low, middle, and high
speed settings.
To set the colour, when the air purifier is in on,
press the NIGHT LIGHT button. The light will cycle
through blue/cyan/green/yellow/
orange/red/purple. When you reach the desired
colour for night light, press the button once
more. To turn the light off, press the NIGHT
LIGHT button again.
1
2
3
Loading ...
Loading ...
Loading ...