Loading ...
Loading ...
Loading ...
The operation of any lawn mower can result in foreign objects thrown into
the eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields while operating your lawn mower or performing any
adjustments or repairs. We recommend standard safety gtasses or a wide
vision safety mask worn over spectacles.
HOW TO USE YOUR LAWN MOWER
ENGINESPEEDCONTROL
MODELS WITH REMOTE THROTTLE
Engine speed is controlled by the throttle
control located on the upper handle.
* Move lever forward to FAST engine
speed for starting and better bagging.
. Move lever backward for SLOW engine
speed.
, Some models have engines equipped
with a choke feature. Move the lever all
the way forward to the CHOKE position
when starting acold engine.
SLOW
FAST
-"1\ I _" It
CHOKE _r ! [ ,'/
"* i/I i ÷-
f ,
/V
I
t
throttle
control
MODELS WITH FIXED SPEED ENGINES
Engine speed was set at the factory for
optimum performance, Engine speed is
not adjustable.
TO ADJUST CUTTING HEIGHT
Adjust cutting height to suit your require-
ments. Medium position is best for most
lawns. Raise wheels for low cut and lower
wheels for high cut.
MODELS WITH MANUALADJUST
BOLT-ON WHEELS
° Remove wheel, bolt, and hardware and
reassemble in desired adjustment hole.
• Reinstall wheel components inthe same
order as they were before removal.
Tighten securely.
• Make sure all wheels are atsame height.
Flat washer
Bolt
3/8-16
Spacer Locknut
MODELS WiTH "QUICK ADJUST"
WHEEL HEIGHT ADJUSTERS
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
• Raise wheels for low cut and lower
wheels for high cut.
• Adjust cutting height to suit your require-
ments. Medium position is best for most
lawns.
• To changecutting height,squeeze adjuster
lever toward wheel. Move wheel up or
down to suit your requirements. Be sure
all wheels are in the same setting.
NOTE: Adjuster isproperly positioned when
plate tab inserts into hole in lever, Also, 9-
position adjusters (ifsoequipped) allow fever
to be positioned between the plate tabs.
LEVERBACKWARD Platetab
TO LOWERMOWER
LEVERFORWARDTO RAISEMOWER Lever
Loading ...
Loading ...
Loading ...