Loading ...
Loading ...
Loading ...
Operator MOWING
POSITION
control bar
Upper
UP handle
Handle
knob
Lower handle
3 POSITION "EZ" HANDLES
• Raise lower handle section to operating
position and align hole in handle with
one of three height positioning holes.
• Insert handle bolt through handle and
bracket and secure with knob.
• Repeat for oppositeside of handle.
Knob .1° "*'Bolt
Handle
bracket
ALL HANDLES
* Raise upper handle section intoplace on
lower handle, remove protective padding
and tighten both handle knobs.
- Remove handle padding holding opera-
tor presence control bar to upper handle.
. Your Fawnmower handle can be ad-
justed for your mowing comfort. Refer to
"ADJUST HANDLE" in the Service and
Adjustments section of this manual.
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
INSTALL REAR WHEELS
(HIGH WHEEL MOWERS ONLY)
Some high wheel models require washers
whichwiUbeprovided ina parts bag. Ifprovid-
ed, installwashers on the axle first asshown.
• Install one (1) rear wheel on the axle of
rear wheel adjuster.
• Install 3/8-16 Iocknut and tighten securely.
• Repeat procedure for other rear wheel.
Axle
3 POSITION "QUICK" HANDLES
• Raise lower handle section to operating
position and squeeze the bottom ends
of lower handle towardseach other until
the pin in handle can be insertedinto
one of the three height adjustment holes.
Handle pin
Handle
bracket
J
Flanged
Iocknut assembly
ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: If your modellawn mower
is mulcher ready, the mulcher plate or plug
must be removed before using mower as
a bagger. To convert mower to bagging or
discharging, see the Operation section in
this manual.
Look at the different grass catcher illustra-
tions that follow. Determine which type
of grass catcher you have and follow the
appropriate instructions.
Loading ...
Loading ...
Loading ...