Loading ...
Loading ...
Loading ...
5
TRAVEL CUP OPERATION
1. Put food ingredients into the travel cup, beginning with harder items like ice and
frozen fruit, and finishing with soft items and liquid. Attach blade assembly and turn
to secure.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, turn cup upside down,
place the assembled travel cup onto the base. Turn clockwise to lock into place.
3. For continuous blending, turn dial to the desired speed. It is possible to switch
between High and Low speeds by simply turning the dial.
4. To pause the blending process, turn the dial to OFF. The blending process will stop.
To re-engage the unit, choose the desired speed.
5. When you have finished blending, turn dial to OFF. Remove the travel cup from the
base. Unplug the unit.
6. Turn cup right side up, turn blade assembly clockwise to remove. Attach travel cup
lid by twisting counterclockwise.
CHOPPING CUP OPERATION
1. Put food ingredients into chopper cup, then attach blade assembly and turn
counterclockwise to secure.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, turn the cup upside
down, place the assembled chopper cup onto the base. Turn clockwise to lock into
place.
3. To continuously chop, turn dial to High or Low speed.
4. To pulse, turn dial to Pulse, holding for desired time; 1 to 2 seconds is
recommended per pulse. Repeat as needed.
5. When you have finished chopping, turn the dial to OFF. Remove the chopping cup
from the base. Carefully remove food with a spatula. NEVER TOUCH THE BLADE
ITSELF. Unplug the unit.
OPERATING AND SAFETY TIPS
• Make sure the electrical outlet is rated at the same voltage as that stated on the
bottom of the blender motor base.
• Always use the blender on a clean, sturdy, and dry surface.
• Always operate the blender jar with the cover on. Place cover on firmly. Keep the
blender jar cover on the blender jar while blending.
• Don’t put hands inside the blender jar when blender is plugged in.
• Don’t remove blender jar or cups while unit is running.
• Don’t place blade assembly onto motor base without the jar or cup attached.
• Make sure blade assembly is tightly attached to jar or cups.
• Always remove blade assembly before cleaning.
• Don’t twist blade assembly from blender jar or cups when removing from
motor base. Simply lift jar or cups from motor base.
• Use a plastic spatula as needed, only when the blender is not plugged in. Do not
use any utensil inside the blender while motor is on.
• Never use metal utensils, as damage may occur to the jar, cup or cutting assembly.
• Don’t store food or liquids in your blender jar.
• Don’t overload blender jar or cups. If the motor stalls, turn the blender off
immediately, unplug the unit and let it cool for at least 15 minutes. Then, remove a
portion of the food and continue.
• CAUTION: NEVER use carbonated beverages in the blending jar, chopping cup, and
travel cups.
• Don’t blend hot liquids in chopper and travel cups.
• Don’t use any container or accessories not recommended by Cuisinart. Doing so
may result in injury.
• To remove jar, lift straight up. Do not twist to remove.
• To remove travel and chopping cup, turn slightly counterclockwise before lifting.
• The blender jar, chopping cup, and travel cups are not recommended for
microwave use.
Loading ...
Loading ...
Loading ...