Loading ...
Loading ...
Loading ...
24
EN
4. Insert the steam pipe into the cup or container at a depth of 1-2 cm. When frothing
milk, move the cup or container up and down. Slowly turn the steam regulator
counter-clockwise to allow steam to escape. The steam pipe can release a few
water droplets before steam is generated.
CAUTION
Danger of burns! Do not turn the steam control knob too quickly, as
steam will accumulate, expel milk and cause serious burns.
5. Once the required amount of milk foam has been produced, turn the steam control
knob clockwise and set the steam switch to the off position.
Note: Wait at least 2 minutes after pressing the steam function before using it again.
Boiling water
1. Turn on the machine by setting the power switch to ON. The red indicator light starts
to blink and the unit starts to heat up.
2. As soon as the heating phase is complete, the red light is constantly lit.
3. Press the coffee switch downwards and the machine starts dispensing water. To stop
the water output, move the switch to the off position.
4. Wait until the machine has heated up again and repeat these steps to dispense hot
water.
After use
After steam/water dispensing or coffee brewing, the temperature of all machine
components rises because the machine has been working under high pressure. If the
machine overheats, the two light indicators will start to ๎กต ash rapidly, indicating that the
temperature of the machine needs to be lowered.
Loading ...
Loading ...
Loading ...