Loading ...
Loading ...
Loading ...
12
13
When the unit is on, hold and at the
same time for 2 seconds to enable/disable Child
Lock.
Press on the remote control to turn the buzzer
on/off.
Operations and Functions
Place the heater on a firm, level surface free from obstructions,
and at least 3ft. (0.9m) away from any wall or combustible
materials.
Plug into an appropriate voltage AC 120V outlet, The unit will
enter standby mode with a beep and power indicator on red.
Your heater is ready for use now.
When the unit is plugged in, press on the heater
/ remote control to turn the heater on with default
settings: 95°F and high mode ( ) on the
LED display.
When the unit is on, repeatedly press on the
heater to cycle through High -> Medium -> Low -> ECO
modes, OR simply press or on the remote
control for mode switch.
When ECO mode is on, the heater will adjust the
working mode automatically based on the ambient
temperature.
Press once again to turn the heater off.
Power ON/OFF
Mode / Heat Level Settings
Mute/Unmute
ECO Mode
When the unit is on, press 图图or 图图on the
heater / remote control to adjust the set
temperature from 40 to 95°F in 1°F increments.
When the unit is running, press on the heater /
remote control to enter timer setting.
Press or to select a time (00h-24h) and
press again to start the timer.
When the timer ends, the heater will
automatically shut off and go into standby.
Note:
Note:
Note:
1.
1.
2.
2.
If you set the timer when the unit is on standby, the
heater will automatically start running when the
timer ends.
after the unit is turned off, the heater will continue
radiating heat for a while because of the unique
properties of diathermic oil.
All the buttons will be locked when Child Lock is enabled.
Press the power button to end the timer immediately.
Child Lock is not applicable to the remote control.
When the ambient temperature reaches the
set temperature, the heating element will stop
running and the indicator 图 will go off.
When the ambient temperature is lower than
the set temperature, the heater will start
running again.
Temperature Adjustment
Timer
Child Lock
Loading ...
Loading ...
Loading ...