Loading ...
Loading ...
Loading ...
EN
W415-2841 / E / 12.22.20
15
installation
2.4.3 trim installation (optional)
1. Install left and right trims, and secure with screws (supplied) (Fig. 2-10).
2. Install top and bottom trims, and secure with screws (supplied) (Fig. 2-11).
Fig. 2-10 Fig. 2-11
2 sets of holes are provided for recessing into the wall. The wall structure may limit how far the appliance
can be recessed. Use the appropriate set of holes when recessing to the frame. Apply shims (not supplied)
between appliance and frame.
note:
It is recommended that the walls of the appliance enclosure be finishing (i.e. drywall) to avoid exposed insula-
tion or vapour barrier coming in contact with the appliance. This will ensure clearance to combustibles is
maintained.
note:
10. Reinstall the plastic panel holding bracket.
11. Place the crystals or optional topaz glass chips and driftwood logs (CHD-1 models only) along the media tray
(see “crystal ember installation” and “optional topaz glass chips and driftwood log installaiton” sections).
12. Install front glass (see “front glass installation and removal” section).
C x 12
Loading ...
Loading ...
Loading ...