Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 101
Debris Bin Release Knob
4. Remove the filter and dump the debris in a
trash can. Lightly tap the filter on the collection
bin to remove loose debris from the filter. If the
filter is clogged from extended use, have the
filter replaced by an authorized dealer.
5. Reverse the procedure to reinstall.
NOTE:
The debris bin must be fully installed and locked
for the vacuum to function properly.
Hose Access Port
The hose access port is located behind the access
panel behind the third row seat on the driver’s
side.
To Remove Vacuum Hose For Cleaning
1. Open the access panel.
Vacuum System Access Panel
2. Open the small access panel on the upper
right side, and unclip the hose from the hose
access port by pushing the yellow vacuum
hose release lever with right thumb and lifting
the hose with index finger.
Vacuum Hose Release Lever
3. Return to vacuum nozzle storage location
located behind the sliding door.
4. Grab the vacuum nozzle and gently pull the
hose out through vacuum nozzle storage
location.
5. Shake the hose to remove any objects stuck in
the hose. Take care not to perforate the hose
while attempting to dislodge any objects.
6. Reverse the procedure to reinstall and clip the
hose into place.
2
22_RUP_OM_EN_USC_t.book Page 101
Loading ...
Loading ...
Loading ...