Loading ...
Loading ...
2. CONTENTS
- 3 -
- 10 -
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
1. TITLE PAGE
1.1 INTRODUCTION.......................................................................................................... 2
1.2 REVISION HISTORY .................................................................................................. 2
1.3 UNDERSTANDING THIS GUIDE................................................................................. 2
1.4 COPYRIGHT NOTICE .................................................................................................2
2. CONTENTS
2.1 CONTENTS ....................................................................................................................3
3. GUARANTEE
3.1 GUARANTEE ............................................................................................................... 4
4. GENERAL PRODUCT INFORMATION
4.1 GENERAL PRODUCT INFORMATION ....................................................................... 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR USE
Personal safety........................................................................................................... 6
6. CONTENTS
6.1 PARTS DRAWING AND LISTING ............................................................................... 7
7. APPLICATION
7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING ...................................... 8
8. PREPARATION
8.1 ADVISORIES BEFORE USE ...................................................................................... 9
9. PROCEDURE AND APPLICATION GUIDE
9.1 APPLICATION GUIDANCE................................................................................... 10-11
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS .................................................................................. 11
9. PROCEDURE AND APPLICATION GUIDE
Components A: Used to lock the flywheel when loosening and tightening the crankshaft
pulley bolt. Remove the starter motor, assemble components A as shown and fit in the starter
aperture so that its tooth locks the flywheel.
Component B: is used to set the crankshaft position.
Remove the blanking plug in the side of the engine block as shown and fit component B. turn
the crankshaft slowly clockwise until the crankshaft web contacts the end of component B.
Component C: is used to lock the belt tensioner in its fully retracted position as shown.
Component D: is used to initially set the position of the crankshaft via a hole in the front
crankshaft pulley as shown in figure 3.
Component E&F are used to lock the camshafts in their timed position independently of
their pulleys. With component B already fitted and the engine at TDC number 1 cylinder
Fit the components E & F ensuring they seat on the surface of the cylinder head. Fit fixing
bolts hand tight (use the cam cover bolts for this purpose).
Loading ...
Loading ...
Loading ...