Loading ...
1. TITLE PAGE
1.2 REVISIONS:
Date first published June 2018.
- 11 -
10. EXPLANATION OF SYMBOLS
- 2 -
10.1 EXPLANATION OF SYMBOLS
Refer to website.
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS GUIDES SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
9. PROCEDURE AND APPLICATION GUIDE
Read the guide.
1.1 INTRODUCTION:
USER GUIDE FOR: Engine Timing Kit
Stock No: 17191
Part No: ETK164
N.B. Observe manufacturers tightening sequence and torques
for the front cover bolts.
Please note images are for guidance only
and subject to change.
N.B. On engines equipped with VCT, if the VCT pulleys require removal or loosening ensure
their initial position is marked with chalk or paint. Additional tooling will be required to set the
position of the VCT pulleys.
Component G: is used fit the new front crankshaft oil seal into the front cover after the front
cover has been fitted to the engine.
Loading ...
Loading ...
Loading ...