Loading ...
Loading ...
Loading ...
English 23
Installation instructions
Supplied parts
The following parts make up the LP conversion kit:
DG69-00549A
(PAD SHEET)
LR(WHT)
LF(WHT) RF(RED)
RR(YEL)
CENTER
Out(PURPLE)
In(GRAY)
ORIFICES/ORIFICES/ORIFICIOS
DTG30P875N*/DTG36P875N*
The all orices’ positions are marked on the provided sheet. The spud in the
pressure regulator is factory-installed for Natural Gas (NG) use. LP conversion
requires spud removal and reinstallation for LP use.
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(LP Gas [Propane] 10 in WCP)
Burner Location BTU Rate Orice size [mm]
RF 11,500 1.04
LF 7,500 0.83
RR 4,000 0.62
LR 7,500 0.83
Center 14,500 In: 0.46 / Out: 0.74 (2 pcs)
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(Natural Gas 5 in WCP)
Burner Location BTU Rate Orice size [mm]
RF 13,000 1.64
LF 9,500 1.40
RR 5,000 1.01
LR 9,500 1.40
Center 19,000 In: 0.70 / Out: 1.30 (2 pcs)
NOTE
115
Orice markings:
115 – Denotes 1.15 mm orice size opening.
Install_DTG36P875N_DG68-01286A-00_EN+MES+CFR.indb 23 2020-05-27 �� 11:00:39
Loading ...
Loading ...
Loading ...