IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should
always be observed, including the following. Read all instructions
before using this appliance.
WARNING
To reduce the risk of burns, fire, electric shock or injury to
persons:
■ Do not use this appliance with a damaged or broken
cutting unit, as injury may occur.
■ Close supervision is necessary when this appliance is
used by, on, or near children and persons with special
needs or certain disabilities.
■ This trimmer is designed for household use only.
■ Do not use attachments not recommended or authorized
by manufacturer.
■ Always store your trimmer in a moisture-free environ-
ment. Do not store trimmer in temperatures exceeding
130°F/54°C.
■ Always remember to turn on the trimmer before you insert
it into your nose or ear to avoid painfully snagging hairs.
■ Never insert the trimmer more than 1/4" (6mm) into nose
or ear. Foreign objects should not come into contact with
eardrum.
SAVE THESE INSTRUCTIONS
MPT-400
Use and
Care Guide
Before Use:
Test a small area on an arm or leg before using your trimmer
completely. Discontinue use immediately if any sensitivity or
allergic reaction occurs. Do not use on sensitive or irritated skin.
How to Use:
This trimmer can trim nose, ear, and body hair. It can also be
used for detailing facial hair styles, neck and sideburns.
The MPT-400 features a compact, pop-
up design. To turn the unit on, push the
Power button and slide up, toward the
head, to expose the blades. (D) To turn
off, push the Power button and slide
back down.
When you want to completely remove
the hair use the trimmer without the
guide comb.
To trim hair closely but evenly, attach the
guide comb. The comb can be attached
in two different positions for either a
2mm trim or a 3.5mm trim. Make sure
that the teeth of the comb are facing in the same direction as
the trimming blade. Align the ridge on the trimmer with one
of the two grooves on the inside of the guide comb then slide
and click into place. (E)
How to Use
All Remington
®
detail trimmers run on one "AAA" ALKALINE
battery.
Inserting the Battery
1. Make sure the trimmer is “OFF” and remove the guide
comb. (A)
2. Slide the power button down, away from the blades,
exposing the battery compartment. (B)
3. Insert one “AAA” ALKALINE battery, positive end down. (C)
4. Slide power button up, towards the blades, retracting the
battery compartment back into the unit. Make sure it fully
clicks into place.
Use of any batteries other than alkaline will negatively affect the
unit’s operating performance. Batteries should not be left in the
unit if the unit is not in use for long periods. To prevent battery
corrosion the unit should be kept in a dry environment. Dead
batteries should be removed immediately and disposed of prop-
erly. Do not use rechargeable batteries. The lower voltage in
recharged batteries impairs the performance of the cutting unit.
Replacing the Battery
A
B C
Register Your New Product Today!
By registering your new Remington
®
product you will receive
these important benefits: Proof of ownership • Product
protection • Product registration • Special offers
Register online at: RemingtonProducts.com
Pop-Up
Detail
Trimmer
E
D
Loading ...
