Loading ...
Loading ...
Loading ...
W415-0809 / D / 02.26.21
EN
14
finishing
4.3 logo placement
LOGO
½"
LOGO
½"
LOGO
½"
LOGO
½"
Remove the backing of the logo supplied. Centre the logo
on the front of the appliance, ½” in from the left side, as
shown.
4.4 media
A. Place lava or ember rock around the base of the appliance,
making sure not to block any burner ports or valve access.
Retain a small amount of lava rock for step 3 and if
applicable step 4.
B. Place formed charcoal lumps around the front and sides of
the appliance.
C. Use remaining lava or ember rock to blend with the
charcoal lumps.
D. GVFL30 ONLY: Sprinkle remaining lava rock onto the outer
fibre ember beds to hide the seam.
GVFL18
GVFL24
GVFL30
!
WARNING
• All previously applied loose material must be removed prior to reapplication
Loading ...
Loading ...
Loading ...