Simer 2800-01 1/2 HP Cast Iron Shallow Well Jet Pump

OWNER’S MANUAL - Page 2

For 2800-01. Also, The document are for others Simer models: 2800*, 2800E*, 2802*, 2802E*, 2803*

PDF File Manual, 28 pages, Read Online | Download pdf file

2800-01 photo
Loading ...
Safety 2
For parts or assistance, call Simer Customer Service at 1-800-468-7867 / 1-800-546-7867
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol. When you see this
symbol on your pump or in this manual, look for
one of the following signal words and be alert to the
potential for personal injury.
warns about hazards that will cause serious
personal injury, death or major property damage if
ignored.
warns about hazards that can cause serious
personal injury, death or major property damage if
ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
The label NOTICE indicates special instructions which
are important but not related to hazards.
Carefully read and follow all safety instructions in this
manual and on pump.
Keep safety labels in good
condition.
Replace missing or dam-
aged safety labels.
Ground motor before
connecting to power
supply.
Meet National Electri-
cal Code, Canadian
Electrical Code, and local
codes for all wiring.
ELECTRICAL SAFETY
Capacitor voltage may be hazardous. To
discharge motor capacitor, hold insulated handle screw-
driver BY THE HANDLE and short capacitor terminals
together. Do not touch metal screwdriver blade or capac-
itor terminals. If in doubt, consult a qualified electrician.
GENERAL SAFETY
Do not touch an operating motor. Modern
motors are designed to operate at high temperatures. To
avoid burns when servicing pump, allow it to cool for 20
minutes after shut-down before handling.
Do not allow pump or any system component to freeze.
To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system components.
Wear safety glasses at all times when working on pumps.
Keep work area clean, uncluttered and properly lighted;
store properly all unused tools and equipment.
Keep visitors at a safe distance from the work areas.
Pump body may explode if used as a boost-
er pump unless relief valve capable of passing full pump
flow at 75 psi is installed.
SIMER warrants to the original consumer purchaser (“Purchaser”) of its products that they are
free from defects in material or workmanship.
If within twelve (12) months from the date of the original consumer purchase any such prod-
uct shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to
the terms and conditions set forth below. Your original receipt of purchase is required to
determine warranty eligibility.
Exceptions to the Twelve (12) Month Warranty
Ninety (90) Day Warranty:
If within ninety (90) days from original consumer purchase any Drill Pump or MiniVac Pump
shall prove to be defective, it shall be replaced, subject to the terms set forth below.
Two (2) Year Warranty:
If within two (2) years from original consumer purchase, any 1/3 HP Submersible Sump
Pump, or Models 2330, 2300 or A5500, shall prove to be defective, it shall be repaired or
replaced at SIMER’s option, subject to the terms and conditions set forth below.
Three (3) Year Warranty:
If within three (3) years from original consumer purchase any 4” Submersible Well Pump, 1/2
HP Submersible Sump Pump, or Booster Pump Model 3075SS shall prove to be defective, it
shall be repaired or replaced at SIMER’s option, subject to the terms and conditions set forth
below.
Five (5) Year Warranty:
If within five (5) years from original consumer purchase any Pre-Charge water system tank
shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the
terms and conditions set forth below.
General Terms and Conditions
Purchaser must pay all labor and shipping charges necessary to replace product covered by
this warranty. This warranty shall not apply to acts of God, nor shall it apply to products
which, in the sole judgement of SIMER, have been subject to negligence, abuse, accident,
misapplication, tampering, alteration; nor due to improper installation, operation, mainte-
nance or storage; nor to other than normal application, use or service, including but not lim-
ited to, operational failures caused by corrosion, rust or other foreign materials in the system,
or operation at pressures in excess of recommended maximums.
Requests for service under this warranty shall be made by returning the defective product to
the Retail outlet or to SIMER as soon as possible after the discovery of any alleged defect.
SIMER will subsequently take corrective action as promptly as reasonably possible. No
requests for service under this warranty will be accepted if received more than 30 days after
the term of the warranty.
This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defec-
tive products.
SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTIN-
GENT DAMAGES WHATSOEVER.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL NOT EXTEND BEYOND THE DURATION OF THE APPLICABLE EXPRESS WAR-
RANTIES PROVIDED HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequential damages
or limitations on how long an implied warranty lasts, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Simer Limited Warranty
SIMER • 293 Wright Street • Delavan, WI U.S.A. 53115
Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351
EMail: [email protected] • Web: http://www.simerpumps.com
WARNING
Hazardous voltage. Can
shock, burn, or cause death.
Ground pump before connecting
to power supply. Disconnect
power before working on pump,
motor or tank.
WARNING
Hazardous pressure!
Install pressure relief
valve in discharge pipe.
Release all pressure on
system before working on
any component.
Loading ...
Loading ...
Loading ...