Loading ...
Loading ...
Loading ...
8
Using the Remote Control
1
Installing the battery
The battery is supplied with the remote control. The first thing to do with the remote
control is to remove the plastic sheet insulated
the battery. For replacement battery, use lithium-based CR2025 battery. Please follow the sequence below to replace the battery.
□ Take out the battery bracket.
□ Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.
□ Press the battery bracket into the remote control, making sure it snaps into position.
□ Turn the remote over and aim it towards the fireplace/heater unit.
□ Press the power button on the top and see if the flames on the fireplace/heater turn on or off.
□ If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
2
Using the remote control
□
The operation of the remote control
buttons work the
same as the buttons on the front panel of the
fireplace/heater. Review the operation section for more
information on the functionality of these buttons.
OPEN
PUSH
OPEN
P
USH
1
2
CR2025
LITHIUM BATTERY
3V
OPEN
PUSH
OPEN
PUSH
WARNING:
Do not ingest batteries.
1. Non-rechargeable batteries are not to be recharged.
2. Batteries are to be inserted with the correct polarity.
3. Exhausted batteries are to be removed from the product.
4. Always purchase the correct size and grade of battery most suitable for the
intended use.
5. Clean the battery contacts and also those of the device prior to battery installation.
6. Remove batteries from equipment when not used for an extended period of time.
NOTE:
Battery disposal
Please always dispose of batteries
at a suitable recycling point.
Main Power
Tim
er
Control
Flame
Control
Heater Up
Heater Down
Loading ...
Loading ...
Loading ...