Loading ...
Loading ...
Loading ...
Auxiliary handle (Fig. 3)
Position the auxiliary handle so that the holes are in
alignment with the holes in the handle support bracket.
Insert the M6X50 hex head bolt into the hex shaped bolt
hole of the bracket. Secure by tightening the wing nut
onto the bolt.
Loosen the wing nut and adjust the angle and height of
the handle to a safe and comfortable position. Secure
into place by tightening the wing nut onto the bolt.
ASSEMBLY
M6x50 Hex
Head Bolt
3
8
Model SN70112-1
BATTERY INSTALLATION AND REMOVAL
Hold the tool and the battery firmly when installing or
removing battery.
Failure to hold the tool and the battery firmly may cause
them to slip from your hands and may result in damage to
the tool and/ or battery and a personal injury.
To install:
Align the battery with the cavity in the handle.
Insert the battery into the handle until the battery
release button locks into place. You should hear a
“click” once the battery is installed.
Note: The battery can only be installed one way.
To remove:
• Depress release button (A) on the back of battery
cartridge (B) to release the battery.
• Pull the battery out of tool.
1
2
Loading ...
Loading ...
Loading ...