Loading ...
Loading ...
The QuietWarmth
®
Radiant Heat system is a retrofit heating system that is installed under the subfloor, between
the joists, to provide either primary or supplementary heat. Completely unseen, under subfloor heating panel sets
warm floor surfaces to about 85°F / 30°C for unparalleled comfort.
Design, installation and use are straight-forward: start by designing the system, then cut the heating panel sets to
length, staple them into position between the joists and complete the electrical connections.
Section 1 - Design Criteria is to be used by the heating system designer. This portion of the manual will generally
be followed prior to ordering material. The designs and drawings completed during this stage must be made
available to the installer(s).
Sections 2 - Job-Site Preparation, 3 - Installation and 4 - Inspection Testing & Completion will be used by
the actual heating system installers. Job-Site Preparation provides a complete list of the materials and supplies
that must be on hand during the installation and testing of the system. Installation and Inspection detail the actual
instal-lation and testing of the system.
RADIANT HEAT FILM FOR UNDER SUBFLOOR
INTRODUCTION AND OPERATION
THE INSTALLATION OF THIS HEATING PRODUCT SHALL BE IN ACCORDANCE WITH THE
MANUFACTURER’S INSTRUCTIONS AND THE REGULATIONS OF THE AUTHORITY HAVING
JURISDICTION.
The installation of this heating product shall be in accordance with Article 424, Part J, of the National
Electrical Code, ANSI/NFPA 70.
THIS EQUIPMENT SHALL BE INSTALLED ONLY BY QUALIFIED PERSONNEL WHO ARE FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE APPARATUS AND THE RISKS INVOLVED.
Heating elements should not be installed at or below 32°F (0°C).
CAUTION
Loading ...
Loading ...
Loading ...