Loading ...
Loading ...
Loading ...
27
www.napoleon.com
N415-0346-AU FEB 23.21
LED Lights: Your appliance has been equipped with a LED (light) strip which is programmed with three
colour modes. Plug the LED power supply into a GFI protected electrical outlet.
Turn on the light switch located under the access panel and toggle the switch o and on to cycle through
to desired Mode.
Mode 1 - Simulated White.
Mode 2 - Connuous 2 colour shi. Takes 8-10 seconds to smoothly ramp up one colour to 100%, as the
other fades o from 100% to 0. Connually shis in colour (17 seconds per colour, up and back down.)
Mode 3 - Freeze Mode Colour stops the colour shi on whichever colour it was on in Mode 2 at the me it
was turned o, does not connue to shi.
NOTE! Switch o for 10 seconds to reset to beginning colour mode.
WARNING! Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Do not change or substute the glass ember material provided with this appliance. If replacing, use
only replacement glass embers available from your local authorized dealer / distributor.
WARNING! To avoid the possibility of burns, maintenance should be done only when the
appliance is cool. Avoid unprotected contact with hot surfaces. Ensure burner is turned o. Turn gas o
at source and disconnect the appliance before servicing. Clean the appliance in an area where cleaning
soluons will not harm decks, lawns, or paos. Do not use ammable, corrosive or abrasive cleaners.
Maintenance / Cleaning Instrucons
WARNING! Hose: Check for abrasions, melng, cuts, and cracks in the hose. If any of these
condions exist, do not use the appliance. Have the part replaced by your Napoleon dealer or qualied
gas installer.
Cleaning Inside The Appliance: While washing your appliance, be sure to keep the area around the
burner and pilot assembly dry at all mes.
WARNING! If the gas control is exposed to water in any way, DO NOT try to use the appliance.
The gas control must be replaced.
AC Connector
AC
Transformer
240V AC 12 vAC
Threaded
Power
Connector
FLAG
CONNECTORS
Digital Control Unit for
LED Colour switching
MD6
Connector
MD6
Connector
Strip Light
Strip Light
Note: Stainless steel tends to oxidize or stain in the presence of chlorides and suldes, parcularly in
coastal areas and other harsh environments, such as the warm, highly humid atmosphere around pools
and hot tubs. These stains could be perceived as rust, but can be easily removed or prevented. To provide
stain prevenon and removal, wash all stainless steel and chrome surfaces every 3-4 weeks or as oen as
required with fresh water and/or stainless steel cleaner.
Control Panel: The control panel text is printed directly on the stainless steel and with proper mainte-
nance will remain dark and legible. To clean the panel, use only warm soapy water. Never apply abrasive
cleaners on any stainless surfaces, especially the printed poron of the control panel or the prinng will
gradually rub o.
!
!
!
!
Loading ...
Loading ...
Loading ...