Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/81175963-gss48st/bg14.png)
20
www.napoleon.com
N415-0346-AU FEB 23.21
Cylinder Retaining Bracket
1. Fasten the bracket to the boom of the propane bole using bolt and nut supplied.
2. Tighten the lag screw into the mounng surface leaving
approximately 1/4” (6mm) of thread above the surface.
3. Slide propane bole into posion so that the bracket slides
under the head of the lag screw.
4. Tighten the lag screw onto the bracket.
5. For fastening to a concrete surface a concrete anchor will be
required. (Not supplied)
LP (Propane) Gas Cylinder Mounng
To Prevent the LP-gas cylinder from pping over, ensure the cylinder support ring is on a level surface.
Place the cylinder into the support ring and ghten the thumb screw to secure.
Cylinder Connecon: Ensure the gas regulator hose is
kink free. Remove the cap or plug from the cylinder fuel
valve. Insert the POL regulator nipple onto the Cylinder
valve. Tighten an-clockwise. Leak test all joints prior
to using the appliance. A leak test must be performed
annually and each me a cylinder is hooked up or if a part
of the gas system is replaced.
If this appliance is to be connected directly to a house
propane gas supply line, ensure a 2.75kPa regulator is
incorporated into the gas system.
CAUTION!
• Make sure cylinder valve is in its full o posion.
• Check cylinder valve features to ensure it has proper
external mang threads.
• Inspect hose thoroughly for damage. Never aempt to use damaged or plugged equipment. See
your local LP Gas Dealer for repairs.
• Locate the hose out of pathways where people may trip over it or in areas where the hose may be
subject to accidental damage.
• Open cylinder valve fully (counter-clockwise). Turn the on/o valve at the unit slowly to the on
posion and use a soapy water soluon to check all connecons for leaks as indicated in the
diagrams before aempng to light the appliance. If a leak is found, turn tank valve o and do not
use the appliance unl repairs can be made.
WARNING! A re will result if the gas supply hose makes contact with the underside of the
appliance.
!
!
Loading ...
Loading ...
Loading ...