REGISTER YOUR LIFETIME WARRANTY NOW
Immediate registration of purchase date, place and receipt number
required for your JayBird Lifetime Warranty Against Sweat
jaybirdgear.com/intheclubnow
1
SECURE FIT FOR SPORT
Finding the right size sports ear cushion will secure
your buds and liberate your workout.
2
GOOD VS GREAT PERFORMANCE
Because everyone’s ears are dierent,
make sure to try out all sizes of eartips.
Only with the perfect size of eartips will you
enjoy a snug t and optimum sound quality.
3
4
5
JF3 Freedom Bluetooth Headphones User Manual
In the box
JF3 Freedom Bluetooth Headphones
Limited Edition Premium Magnet Sealed JayBird Carry Case
3 pairs regular eartips (S,M,L)
3 pairs secure tting sport ear cushions (S,M,L)
1 pair of optional ear hooks
USB Cable
User Manual
Charging for rst use
Charging the battery before use is recommended but not required.
The headphones ship pre-charged however initial charge will vary.
Low battery is indicated by the status indicator blinking red with an
audible tone every 20 seconds. Connect charging cable with the
charging port of headphones under the USB cover on the right earpiece.
Connect cable to the USB slot of any PC or Mac. The status indicator will
be red while charging and will turn o when fully charged. JayBird also
oers an AC power adapter which your USB cable can plug into.
AC power adapter sold separately.
Pair mode
Begin with headphones powered
o. Push and hold center button
for 6-8 seconds until status
light alternates red and blue.
You are now in pair mode.
See your phone/music device
manual for pair instructions.
Passcode is 0000.
8 sec
Pair Mode (detailed step by step instructions)
1. Keep the headphones and mobile phone in the range of 1 meter when pairing.
2. Put the headphones into pairing mode by pushing the center button for 8 seconds
(LED will ash red and blue).
3. Start the Bluetooth function on mobile phone and search for Bluetooth devices.
After searched, select “JF3 Freedom” in the Bluetooth device list.
4. Enter password or PIN No:”0000” on your mobile phone when prompted.
5. If required, after successful pairing, select “JF3 Freedom” in the Bluetooth device list
and press “connect”.
6. After successful connecting, the blue light blinks twice every 4 seconds.
Pairing with a Bluetooth Adapter (iSport or uSport)
1. Keep the Bluetooth adapter and headphones within 1 meter of each other
when pairing.
2. Put the headphones into pair mode as outlined above.
3. Plug the Bluetooth adapter into the iPhone or iPod and play a song.
4. The headphones and adapter will pair automatically (passcode of adapter
must be 0000)
5. After successful pairing and connecting, the blue (or red) light of headphones
blinks twice every 4 seconds.
Pairing with several Bluetooth devices
The headphones can connect with two devices at most. A mobile phone with
HFP prole; and a device with A2DP proles. If you want to pair two Bluetooth
devices, please refer to the following steps.
1. Firstly, pair the headphones with the Bluetooth adapter
2. Disconnect the Bluetooth adapter from the iPhone or iPod
3. Pair and connect the headphones with the mobile phone
4. Reconnect the Bluetooth adapter, will connect with headphones automatically.
Not all the mobile phones support all the functions listed. Please refer to the instruction of your
mobile phone. When the volume is adjusted to max or min, you will hear a indication sound.
For some mobile phones, when you accept a call on the phone, the call will be sent to the
mobile phone. You can switch the call to headphones by using the center button on the
headphones or through the phone. Please refer to the instruction of your mobile phone for
further information.
Function Status Indication Operation
Voice dial Standby mode Short tone Press and hold center button for 2 seconds
Redial Standby mode Short tone Double click center button
Volume up Music/Call mode NA Short presses of Vol+ button
Volume Down Music/Call mode NA Short presses of Vol - button
Answer Call Incoming Call Short tone Press center button
Reject Call Incoming Call Short tone Press and hold center button for 2 seconds
End Call During Call Short tone Press center button
During Call Short tone Press and hold center button for 2 seconds
Mute During Call Dbl tone every 5 sec Double click center button
Unmute During Call NA Double click center button
Switch b/w phone
& headset mode
For some of mobile phones, when they are playing music, the music will transmit to the
speaker of mobile phone. If this happens, select “transmit the sound through Bluetooth”
in the “setting” of music play interface, and then choose “JF3 Freedom” in the device list.
Please refer to the instruction of your mobile phone for further information. When the volume
of headphones is adjusted to max or min,you will hear a tone. Remote control
the function such as next track, previous track, etc require your mobile phone to support AVRCP.
Please refer to your mobile phone user manual or Bluetooth transmitter for further info.
Function Status Indication Operation
Volume up Music/Call mode NA Short presses of Vol+ button
Volume Down Music/Call mode NA Short presses of Vol - button
Play/Pause Music Mode Short tone Press center button
Next track Music Mode Short tone Long press of Vol - button
Back track Music Mode Short tone Long press of Vol + button
Charging LED Indicator Status of headphones
Red light is on Charging
Red light is o Finished charging
Pairing LED Indicator Status of headphones
red and blue alternating Pair Mode
Blue double blink every 2 sec Standby mode
Blue periodic blinking Connected to device
Red periodic blinking Low battery
Tone Indicator Status of headphones
Two tones every 5 sec Conversation mode and mic mute
Tone every 30 seconds Low battery
JF3 Specications
Bluetooth Version V2.1 + EDR
Prole Headset, handsfree, A2DP, AVRCP
Eective Range 10 meters (30 feet)
Working time Music & calls up to 6 hours
Standy time Up to 250 hours
Input voltage DC 5A 100mA
Charging time Approximately 2 hours
Dimensions 18 x 40 x 7.5 mm
Weight Approx 16 g
+1.866.244.3399 | [email protected]om
jaybirdgear.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modications to device will void the user’s authority to operate the device. The battery is recycled. Do not dispose of the battery in re, as it may cause explosion.
In the box & rst usePairing in detailPairing several devicesMaking a call
Status LightWarranty information
Pairing & Power on/o
Pairing with adapter
Basic CommandsPlaying music
Specications & care
Power on/o
Push and hold center button for 3-5 seconds
Note
- If the pairing is not successful, switch o headphones by pushing the center
button for 3 seconds, and then re-pair according to the steps outlined above.
- After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted, so there is no need to pair again.
- The headphones will connect with the latest paired device. If you want to pair with other
Bluetooth devices, switch o the Bluetooth function of the current Bluetooth device, and then
pair and connect it with the new Bluetooth device according to steps outlined above.
Note
Freedom does not support apt-X CD quality audio even though it’s oered on iSport or uSport.
Note
Mobile phones that support HSP and A2DP proles simultaneously may block the
Bluetooth adapter from reconnecting to the headphones.
Key
Short push of adjacent button
Push and hold of adjacent button
Care and maintenance
Keep dry and do not store in a damp place
Do not put the product in direct sunlight for extended periods of time or in hot areas.
High temperature will shorten the life of the electronic device, destroy the battery, and
distort certain plastic.
Do not expose the product to extreme cold.
Do not disassemble the product.
Do not drop the headphones.
Do not use chemicals or detergent to clean the product.
If the product fails to work please contact JayBird support at jaybirdgear.com
Warranty
jaybirdgear.com/warranty
WARNING: Due to the isolating characteristics of these headphones do not use while driving,
riding a bike or where vehicular trafc is present, or in any other activity where failure to hear
surrounding sounds could be dangerous. Use of these headphones at excessive volumes
may cause permanent hearing damage. Always turn the volume down before use.
Take caution in regards to inserting objects into ear canal, use at own risk.
Copyright 2011 JayBird Gear LLC. All rights reserved. JayBird,
and the JayBird logo are trademarks of JayBird Gear LLC. Bluetooth is a trademark
owned by Bluetooth SIG, Inc. USA, and licensed to JayBird Gear LLC. iPhone is a
trademark of Apple, Inc., registered in the U.S. and other countries. Assembled in China
Secure Fit
Secure Fit
JF3 Freedom User Manual
Warranty, safety & support
jaybirdsport.com
+1.866.244.3399
EN 6
WHEN OUTDOORS USE AN ARMBAND (NOT YOUR POCKET)
Outdoors / gyms: Without walls or ceilings for the Bluetooth signal
to bounce o, your body can block the signal to the headphones.
For best signal performance, have your music device ABOVE waist
level on your RIGHT side.
ONE MORE SECURE FIT OPTION
To make sure all tting preferences
are covered, earhooks are included
as an alternative secure t option.
EN 7
EN 8
EN 9
EN 10
EN 11
EN 12
EN 13
EN 14
EN 15
EN 16
EN 17
EN 18
EN 1
EN 2
EN 3
EN 4
EN 5
