Masterforce PGA125G OPERATOR’S MANUAL

Loading ...

Page 12

OPERATION

Fig. B2

Working Position (Example)

Opened Guard Clamping Lever

Fig. B3

Working Position (Example)

Closed Guard Clamping Lever

3. FITTING THE DISCS (SEE C1, C2)

Put the inner ange onto the tool spindle.

Ensure it is located on the two ats of spindle.

Place the disc on the tool spindle and inner

fIange. Ensure it is correctly located. Fit the

threaded outer ange making sure it is facing

in the correct direction for the type of disc

tted. For grinding discs, the ange is tted

with the raised portion facing towards the

disc. For cutting discs, the ange is tted with

the raised portion facing away from the disc

(see C1).

Press in the spindle lock button and rotate

the spindle by hand until it is locked. Keeping

the lock button pressed in, tighten the outer

ange with the spanner provided. (See C2).

For SDS ange, keep the lock button pressed

in and tightened the SDS ange with hand.

(See C3)

Fig. C1

Fig. C2

Fig. C3

Loading ...

Masterforce PGA125G 13-Amp Corded 4-1/2"-6" Trigger Switch Angle Grinder