Loading ...
Loading ...
Loading ...
Page 11
OPERATION
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
1. INSTALLING THE AUXILIARY HANDLE
(SEE FIG. A1, A2)
You have the option of two working positions
to provide the safest and most comfortable
control of your angle grinder. The handle
is screwed clockwise into either hole on the
sides of the gear case.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle
reduces the vibrations, making operation
more comfortable and secure. Your tool is
equipped with an auxiliary handle that can be
used for storage of the spanner. (See Fig. A2)
Fig. A1
Fig. A2
2. ADJUSTING WHEEL GUARD (SEE FIG.
B1, B2, B3)
For work with grinding or cutting discs, the
wheel guard must be mounted.
Wheel Guard for Grinding
The coded projection on the wheel guard (5)
ensures that only a guard that ts the machine
type can be mounted.
Open the clamping lever (11). Place the wheel
guard (5) with coded projection into the coded
groove on the spindle of the machine head
and rotate to the required position (working
position).
To fasten the wheel guard (5), close the
clamping lever (11).
The closed side of the wheel guard (5) must
always point to the operator.
NOTE: With the clamping lever (11) open the
clamp adjusting nut (9) can be adjusted to en-
sure the guard is securely clamped after the
clamping lever (11) is nally closed.
Wheel Guard for Cutting
WARNING
For cutting metal, always work
with the wheel guard for cutting (14).
The wheel guard for cutting (14) is mounted
in the same manner as the wheel guard for
grinding (5).
Fig. B1
Abra la palanca de sujeción de la protección
Inserte y gire en sentido
de las manecillas del reloj
Proyección
Loading ...
Loading ...
Loading ...