Scan
button
Lightning™
connector
Screen
Car adapter
Frequency tuner
Memory preset button
SETTING UP YOUR TRANSMITTER
1 Plug the car adapter into your vehicle’s cigarette lighter
receptacle. Your transmitter turns on.
2 Set the desired volume level on your iOS device.
Note: Volume level cannot be adjusted once your iOS device has
been plugged into the Lightning connector.
3 Connect the Lightning connector to your iPhone, iPad, or iPod.
TUNING YOUR TRANSMITTER
You can tune your transmitter manually, automatically, or with
saved presets.
PACKAGE CONTENTS
• FM transmitter
• Quick Setup Guide
FEATURES
• Lightning™ connector works with your iPhone, iPad,
and iPod
• Plays music from your iPhone, iPad, or iPod on your
car’s FM radio
• Auto-scan quickly nds unused stations
• Buttons easily control your transmitter
Before using your new product, please read these instructions to prevent any damage.
Manually tuning your transmitter
1 Tune your vehicle’s radio to a weak or unused FM frequency.
You should hear static.
2 Press and hold M (on the transmitter), then press – or + to
tune your transmitter to the same frequency as your radio.
The frequency is shown on the screen.
Automatically tuning your transmitter
1 Press and hold Scan. Your transmitter automatically selects
a weak or unused frequency.
2 Tune your radio to the same frequency as your transmitter
(read the frequency o the display screen).
Using memory presets
• Press the or button to choose a previously saved
memory preset. See “SAVING MEMORY PRESETS” for more
information.
SAVING MEMORY PRESETS
1 Press or button to the Memory Preset you want (M1,
M2, M3).
2 Press M to enter manual tuning mode and see the Memory
number ashing.
3 Press or button to tune the transmitter to the
frequency that you want to save.
4 Press M to save the frequency to the corresponding number.
QUICK SETUP GUIDE
FM Transmitter with
Lightning™ Connector
NS-MA5FMT / NS-MA5FMT-C / NS-MA5FMT2-C
Loading ...
