Will this automatically syncs with my router and create the same network name and password? The one I bought from Verizon does

It does automatically sync. It created the same network name with an EXT behind it and it kept the same password. So I now see two networks with the same name, one with EXT behind it

Will it work with frontier fios quantumrouter with active cable tv subscription? do i need frontier to do anything to make it work?

It will work with that router as well. No, extender just need to be connected with a coax line.

When you get the verizon branded one it matches your wifi name exactly. is there a way to do this on this one, without -ext

Yes, you can access the interface of the unit and manually configure the wireless settings as desired.

Can a router manage multiple near moca's and can i insert an unmanaged switch between the far moca unit and multiple ip cameras?

You would need to contact the router mfg to verify but if it has Ethernet or MoCA capability the answer should be yes. You can use a switch connected to these to allow multiple device connections.

Why is this offered in a single unit, wouldn't you need at the minimum two to work?

Yes, you need a minimum of two to get started, but you can add additional individual stations by multiplexing the coax output of the primary unit.

Does it support custom key for moca encryption?

Yes,to save settings the adapter must be disconnected from the coax network. Settings must be changed on all adapters before reconnecting to the network you may need to use a different browser or disable security programs.

Will the tv/stb port provide passthrough data from the wall to a cable modem if no seprate splitter is used or will it only pass TV signals?

It is capable to simultaneously send and receive the data as well as TV signals through the coax.

Will this work if I have internet and cable television in the home or only if I have internet?

In Both cases it will work but if you have internet and cable services than both should be from same provider. ECB adapter is compatible with cable services but not satellite services.

If i plug the coaxial cable from the wall to the bridge and than the ethernet cord to the tivo mini will that work?

No. You need at least 2 MOCAs and a cable filter. Please view the Actiontec video in YouTube. The filter is for security and for your Ethernet signal to stay with in you premises.

Will this support a trunk link between two switches?

Yes, and you can effectively trunk multiple switches too.

Could you use one adaptor?

Yes. If the router is MoCA enabled, you can use only one adaptor in any room where you want but there should be a coax outlet.

What is a 2 pack? two adapters? or two sets of adapters, totaling four adapters?

It is 2 adapters total, so comes with what is pictured. There is an option to buy individually as well.

Can I use 1 adapter at the back of my modem and the other on the end of a dedicated coax to a wireless router for WiFi in my shop?

I used the adapters to enable my coax to provide a dual function as cable tv and internet service for my Tivo in order to eliminate my Tivo's wireless adapter. It works great for that, no buffering.

ScreenBeam ECB6250K02 MoCA 2.5 Network Adapter User Manual

Coaxial-to-Ethernet

Conversion Kit

User Guide

Bonded MoCA

Network Adapter

Model # ECB6200

0535-005-000 rev. 1

Table of Contents

Table of Contents 1

Getting Started 3

Introduction 3

Package Contents 4

Requirements 4

Features 4

Connecting the Adapters 5

Connecting the First Adapter 5

Connecting Additional Adapters 7

Specications 9

Notices 11

Warranty 11

Important Safety Instructions 12

1

Bonded MoCA Network Adapter

FCC Class B Equipment 13

Technical Support 15

2

Getting Started

Introduction

Congratulations for purchasing the Actiontec ECB6200 Bonded MoCA

Network Adapter. e Adapter is a simple, exible solution for extending

a home network. By leveraging the ubiquity of coaxial cabling within the

modern home, the Adapter provides an Ethernet Internet port anywhere

a coaxial connection is available. It also features a TV/STB Out coaxial

port to allow for existing connections at the coaxial wall port.

is user manual explains the procedures needed to connect the Adapter.

!

3

Bonded MoCA Network Adapter

Package Contents

• ECB6200 Bonded MoCA Network Adapter

• Coaxial cable

• Power adapter

• Quick Start Guide

• Ethernet cable

Requirements

• Available coaxial port in installation areas

• Available electrical wall socket in installation areas

Features

• Ethernet port (gigabit)

• Coax In coaxial port (v. 2.0)

• TV/STB Out coaxial port (v. 2.0)

• Power, Coax, and Ethernet LEDs:

- Power LED: glows solid green when Adapter is powered up.

- Coax LED: glows solid green with connection on the Coax port.

- Ethernet LEDs (2): located on upper right and le corners of the

Ethernet port; le LED glows green on connection; right LED

blinks amber when data is transferred across port.

!

4

Connecting the Adapters

Connecting the Adapter is a relatively simple process. First, connect one

Adapter to the TV or set-top box, the broadband modem or router, and

the coaxial network to establish the Internet signal. en, additional

Adapters can be installed throughout the home or oce at any location

Ethernet Internet access is needed, and an available coaxial port is

available.

Connecting the First Adapter

e rst Adapter must be connected to the TV or set-top box, the

broadband modem or router, and the coaxial network. is Adapter takes

the Internet signal from the modem/router and delivers it to the coaxial

network, while keeping the TV/set-top box connected.

To connect the rst Adapter:

1. Remove the end of the coaxial cable connected to the TV or set-top

box from its coaxial wall port.

2. Connect the end of the coaxial cable removed in step 1 to the TV/STB

Out coaxial port on the side of the Adapter.

3. Connect another coaxial cable into the coaxial wall port le

unconnected in step 1.

4. Connect the other end of the coaxial cable installed in step 3 to the

Coax In coaxial port on the side of the Adapter

5. Connect one end of an Ethernet cable into the Ethernet port of the

modem/router.

6. Connect the other end of the Ethernet cable into the Ethernet port on

the side of the Adapter.

5

Bonded MoCA Network Adapter

7. Plug the provided power adapter into the Power port on the side of

the Adapter.

8. Plug the other end of the power adapter (external, 5V DC, 2A, made

by APD, model #WA-10P05FU) into an electrical outlet.

When complete, the setup should look similar to the gure below:

!

e Internet signal is now being delivered across the coaxial network.!

6

Connecting the Adapters

Connecting Additional Adapters

If necessary, additional Adapters can be placed at locations around the

home or oce that need an Ethernet Internet connection, but currently

only have a coaxial port.

To connect additional Adapters:

1. Find a coaxial wall port near the desired location and unplug the

coaxial cable connected to the TV or set-top box. If no device is

plugged into this coaxial wall port, skip to step 3.

2. Connect the end of the coaxial cable removed in step 1 to the TV/STB

Out coaxial port on the side of the Adapter.

3. Connect a coaxial cable into the coaxial wall port indicated in step 1.

4. Connect the other end of the coaxial cable installed in step 3 to the

Coax In port on the side of the Adapter.

5. Connect one end of an Ethernet cable into the Ethernet port of the

device to connect to the Internet.

6. Connect the other end of the Ethernet cable into the Ethernet port on

the side of the Adapter.

7. Plug the provided power adapter into the Power port on the side of

the Adapter.

!

7

Bonded MoCA Network Adapter

8. Plug the other end of the power adapter (external, 5V DC, 2A, made

by APD, model #WA-10P05FU) into an electrical outlet.

When complete, the setup should look similar to the gure below:

!

e device connected to the Ethernet port is now connected to the

Internet via the coaxial network. Repeat this process to install additional

Adapters throughout the home.!

8

Specications!

!

Model Number

ECB6200

IP

LAN MoCA (v. 2.0; up to 1.4 Gbps throughput)

LAN Ethernet Port 10/100/1000 (1)

LAN Connections

Coax In Frequency Range - Extended D-band: 1125MHz ~ 1675MHz;"

Full Port Range: 5MHz ~ 2150MHz

TV/STB Out Frequency Range - 5MHz ~ 1002MHz

LED Indicators

Power, Coax

Power

External, 5V DC, 2A, 1.3 mm diameter connector plug"

Made by APD, model #WA-10P05FU

Regulatory

FCC, UL 60950-1, CUL, MoCA, IC

!

9

Bonded MoCA Network Adapter

Environmental

Ambient temperature - 0ºC to 40ºC (32ºF to 104ºF)

Storage temperature - -20ºC to 85ºC (-4ºF to 185ºF)

Operating humidity - 10% to 85% non-condensing

Storage humidity - 5% to 90% non-condensing

Note: Specications are subject to change without notice.

!

10

Notices

Warranty

is product has a one-year Limited Hardware Warranty and 90-day free

soware updates from date of purchase.

Local Law

is Limited Warranty Statement gives the customer specic legal rights.

e customer may also have other rights which vary from state to state in

the United States, from province to province in Canada, and from

country to country elsewhere in the world.

To the extent that this Limited Warranty Statement is inconsistent with

local law, this Statement shall be deemed modied to be consistent with

such local law. Under such local law, certain disclaimers and limitations

of this Warranty Statement may not apply to the customer.

Go to http://www.actiontec.com/products/warranty.php for more

information.

!

11

Bonded MoCA Network Adapter

Important Safety Instructions

Basic safety precautions should always be followed to reduce the risk of

re, electrical shock, and personal injury, including the following:

• Do not use this product near water – for example, near a bathtub,

kitchen sink, laundry tub, or swimming pool, or in a wet basement;

only clean with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus including

ampliers that produce heat.

• Do not use the telephone to report a gas leak in the vicinity of the

leak.

• Use only the power cord and batteries indicated in this manual if

applicable. Note: you may need to reword for batteries or adapters.

• Do not dispose of batteries in re, as they may explode – check with

local codes for possible special disposal instructions if applicable.

Coaxial Cable

If applicable, the coaxial cable screen shield needs to be connected to the

Earth at the building entrance per ANSI/NFPA 70, the National Electrical

Code (NEC), in particular Section 820.93, “Grounding of Outer

Conductive Shield of a Coaxial Cable,” or in accordance with local

regulation.!

12

Notices

FCC Class B Equipment

is equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits

are designed to provide reasonable protection against harmful

interference in a residential installation. is equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged

to try and correct the interference by implementing one or more of the

following measures:

• Reorient or relocate the device;

• Increase the separation between the equipment and receiver;

• Connect the equipment to an outlet on a circuit dierent from that to

which the receiver is connected (applicable only to powerline

products);

• Consult the dealer or an experience radio or television technician for

help.

Declaration of Conformity for Products Marked with

the FCC logo–USA Only

is device complies with Part 15 of the FCC Rules license-exempt RSS

standard(s). Operation is subject to the following two conditions:

1. is device may not cause harmful interference;

2. is device must accept any interference received, including

interference that may cause undesired operation of the device.

13

Bonded MoCA Network Adapter

Modications

e FCC requires the user to be notied that any changes or

modications made to this device that are not expressly approved by

Actiontec Electronics, Inc, may void the user’s authority to operate

the equipment.

Declaration of Conformity for Products Marked with

the Industry Canada (IC)–Canada only

is device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions:

1. is device may not cause harmful interference;

2. is device must accept any interference received, including

interference that may cause undesired operation of the device.

Contact Information

For questions regarding your product or the FCC/Industry Canada

declaration, contact:

Actiontec Electronics, Inc"

760 North Mary Avenue, Sunnyvale, CA 94085, United States"

Tel: (408) 752-7700 Fax: (408) 541-9003

!

14

Notices

Technical Support

Go to www.actiontec.com/support for product support, updates, and

more information including:

• Firmware updates

• Troubleshooting

• Registration

• FAQs

Technical Support Phone Number

United States: 1 (888) 436-0657

15

ScreenBeam ECB6250K02 MoCA 2.5 Network Adapter

Product's Documents

User Manual

Specifications

ScreenBeam ECB6250K02 Questions and Answers

#1 Will this automatically syncs with my router and create the same network name and password? The one I bought from Verizon does

#2 Will it work with frontier fios quantumrouter with active cable tv subscription? do i need frontier to do anything to make it work?

#3 When you get the verizon branded one it matches your wifi name exactly. is there a way to do this on this one, without "-ext"

#4 Can a router manage multiple near moca's and can i insert an unmanaged switch between the far moca unit and multiple ip cameras?

#5 Why is this offered in a single unit, wouldn't you need at the minimum two to work?

#6 Does it support custom key for moca encryption?

#7 Will the tv/stb port provide passthrough data from the wall to a cable modem if no seprate splitter is used or will it only pass TV signals?

#8 Will this work if I have internet and cable television in the home or only if I have internet?

#9 If i plug the coaxial cable from the wall to the bridge and than the ethernet cord to the tivo mini will that work?

#10 Will this support a trunk link between two switches?

#11 Could you use one adaptor?

#12 What is a 2 pack? two adapters? or two sets of adapters, totaling four adapters?

#13 Can I use 1 adapter at the back of my modem and the other on the end of a dedicated coax to a wireless router for WiFi in my shop?

Related Products

ScreenBeam ECB7250K02 MoCA Network Adapter

ScreenBeam ECB6200S02 MoCA 2.0 Network Adapter

ScreenBeam ECB6250S02 MoCA 2.5 Network Adapter

ScreenBeam ECB6200K02 MoCA 2.0 Network Adapter for Ethernet Over Coax (2 Pack) – 1 Gbps Ethernet, Coax to Ethernet Adapter, Enhanced Streaming and Gaming (Model: )

ScreenBeam ECB7250S02 Bonded MoCA 2.5 Network Adapter True 2.5 Gbps Ethernet Port