Loading ...
Loading ...
Loading ...
Page 11
OPERATION
BASE SHOE ADJUSTMENT (FIG.5)
FIG. 5
For maximum control and longer blade life,
the base assembly slides in or out to adjust
the effective stroke length.
1. Remove the battery pack from the saw.
2. Pivot the shoe-release lever clockwise;
slide the shoe to the desired position, it
allows six positions to adjust.
3. Pivot the shoe-release lever
counterclockwise to secure the shoe.
WARNING:
To avoid injury and
damage, do not operate the saw without the
pivot shoe in place. The spindle may strike
against the workpiece and damage the
reciprocating mechanism.
GENERAL CUTTING (FIG.6)
FIG. 6
Your reciprocating saw has a built-in LED
work light for illuminating the cutting area.
To activate the LED work light, squeeze
the lock-off button and depress the
trigger switch. The light will automatically
turn off within 10 seconds after releasing the
trigger.
BLADE SELECTION
In order to obtain the best performance from
the saw, it is important to select the correct
blade for the particular application and type
of material to be cut.
INSTALLING A SAW
BLADE (FIG. 4)
FIG. 4
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the
blade clamp.
3. Insert the saw blade into the blade
clamp as far as possible, and release the
blade-clamp lever to lock the blade
in position.
REMOVING THE SAW
BLADE (FIG.4)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the
blade clamp.
3. Remove the saw blade from the
blade clamp.
ATTACH
DETACH
OUT
IN
Loading ...
Loading ...
Loading ...