Loading ...
Loading ...
Loading ...
Cima FF 5
PREPARING THE INSTALLATION
Before proceeding with the installation of this screen, take time to thoroughly read and understand
these installation instructions.
PREPARATION
Speciļ¬cations regarding the individual screen dimensions, weight, etc. are provided by the factory when
the unit is ordered.
Before beginning the installation:
``
Make sure there is a clean surface on which to unroll the screen and assemble the frame.
``
Check the size and weight of the screen to be installed so that you can plan for the number of people
required for installation. You need at least two people to mount the smaller screens; more are needed
for larger, heavier screens.
You will need:
``
Lint-free, clean cloth gloves for handling the screen
``
Ladders for the personnel supporting the screen during the mounting process
``
A level
``
Fasteners appropriate for the surface on which the screen is being mounted
``
A drill
``
Tools for tightening fasteners
Note: Bolts and other fasteners for the screen are standard gauge and sizes used in the U.S.,
regardless of where they will be installed. For this reason, the sizes are expressed in inches rather
than metric measurements.
UNPACKING
Be sure to unpack carefully in a clean area. Use special care when handling the screen so that it does not
become soiled or damaged. If you plan to repack your screen and hardware for transportation to another
location, you may wish to photograph or make a note of how it was packed. Keep the packing material.
i CAUTION
Do not stand on the screen tube or store it on its end. This will cause screen damage. If you are not
going to install the screen immediately, make sure it remains horizontal during storage.
Loading ...
Loading ...
Loading ...