Loading ...
Loading ...
Loading ...
ENGLISH
|
7
MOP HEAD
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Mop Head with main unit as shown (Figure 2).
2. Slide Mop Head neck into Steam Nozzle, pressing firmly until release button snaps
through hole.
3. To remove Mop Head, press firmly on release button while simultaneously pulling Mop Head
away from Steam Nozzle.
MICROFIBER PADS
1. Lay one Microfiber Pad on flat surface, with two fastener
strips facing upward.
2. Align Mop Head above Microfiber Pad. Make sure Mop
Head is oriented with Pad as shown, and centered as best
as possible (Figure 3).
3. Press Mop Head firmly down onto Microfiber Pad.
Fastener strips will adhere to pad grips on underside
of Mop Head. Pad should now be attached and ready
for use.
CAUTION: Use care when handling a recently used
Microfiber Pad, as it may still be hot.
NOTE: Microfiber Pads are machine washable. To
avoid picking up lint, washing separately from other
fabrics is recommended. Only use liquid detergent.
Avoid using any fabric softeners or bleach. Air drying
is recommended; machine drying on a low setting is
acceptable as well.
HOLE
FIGURE 3
RELEASE
BUTTON
FIGURE 2
±
±
±
MOP HEAD NECK
STEAM NOZZLE
Loading ...
Loading ...
Loading ...