Loading ...
Loading ...
Loading ...
5
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
OPERATION
■ Depress the switch trigger to start the drill.
■ Move the dr ill bit into the w orkpiece, applying only
enough pressure to keep the bit cutting. Do not force
the drill or apply side pressure to elongate a hole . Let
the tool do the work.
WARNING:
Be prepared f or binding at bit breakthrough.
When these situations occur, drill has a tendency
to g rab and kic k opposite to the direction of
rotation and could cause loss of control when
breaking through mater ial. If not prepared, this
loss of control can result in possib le ser ious
injury.
■ When dr illing hard, smooth surf aces, use a center
punch to mar k the desired hole location. This will
prevent the drill bit from slipping off-center as the hole
is started.
■ When drilling metals, use a light oil on the dr ill bit to
keep it from overheating. The oil will prolong the life of
the bit and increase the drilling action.
■ If the bit jams in the workpiece or if the drill stalls,
stop the tool immediately . Remove the bit from the
workpiece and determine the reason for jamming.
NOTE: This dr ill has an electr ic brake. When the s witch
trigger is released, the chuc k stops tur ning. When the
brake is functioning proper ly, spar ks will be visib le
through the vent slots on the housing. This is normal and
is the action of the brake.
MAINTENANCE
WARNING
When ser vicing, use only identical R YOBI
replacement par ts. Use of an y other par ts may
create a hazard or cause product damage.
Avoid using solv ents when cleaning plastic par ts. Most
plastics are susceptible to damage from v arious types of
commercial solvents and ma y be damaged b y their use .
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at an y time let br ake fluids , gasoline,
petroleumbased products , penetrating oils , etc.,
come in contact with plastic parts. Chemicals can
damage, w eaken or destro y plastic which ma y
result in serious personal injury.
Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.
WARNING
Do not attempt to modify this tool or create
accessories n ot r ecommended for u se w ith this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as w aste. The machine, accessor ies and
packaging should be sor ted f or
environmental-friendly recycling.
SYMBOLS
Safety Alert
V Volts
min
-1
Revolutions or reciprocations per minute
Direct current
CE Conformity
Please read the instructions carefully before
starting the machine.
Recycle unwanted
Waste electr ical products should not be
disposed of with household waste. Please
recycle where f acilities exist. Check with y our
Local Authority or retailer for recycling advice.