Loading ...
Loading ...
Loading ...
Dry ironing
Your iron can be used for dry ironing. Set the
steam switch
(6)
to off and set the temperature
dial
(16)
as desired (see page 3).
You won’t need water in the tank unless using
the water spray or steam boost features
.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Set the
temperature to MAX. Hold the iron between 1cm
and 2cm away from the item (ensuring the
soleplate does not touch any delicate fabrics)
and press the steam boost button
(2).
Anti-drip system
This prevents water escaping from the soleplate
(14)
when the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates that
the system is functioning correctly
.
Anti-scale system
This system reduces scale deposits and helps
prolong the life of the iron
.
Auto shut-off
If the iron is not taken off the charging base (10) for
8 minutes, the product will automatically turn off
for safety and to save energy. When this happens,
the temperature indicator light (3) will flash.
To restart the iron, disconnect the iron from the
charging base and replace, then wait for the
temperature to rise again.
NOTE: The appliance is not turned off completely
in auto shut-off mode. To switch the product off,
unplug the product from the mains outlet.
5
2
Features of your iron
2
6) Steam boost
P
ress the steam boost button
(
2)
f
or an extra
steam burst for stubborn creases / heavy fabrics.
Unlike the constant steam function, the steam
b
oost function may also be used with the 1 or 2
d
ot temperature settings.
N
OTE: To avoid excess moisture, never operate
t
he steam boost more than three times in quick
s
uccession
.
Using the iron for steam ironing (continued)
3
Charging Base Indicator Lights Explained
Red
light
Green
light
Green
light
Flashing
red light
IRON
HEATING
IRON
READY
TO USE
REMOVE
IRON
FROM
BASE
FOR USE
RETURN
IRON TO
BASE TO
REHEAT
WARNING: Do not obscure the charging base sensor (8) at any time, otherwise the charging base
indicator light (7) may not light up correctly. Clean away any water or dirt that collects on it.
RN303251MUK Rev1.qxp_Instruction Booklet 03/03/2021 09:29 Page 5
Loading ...
Loading ...
Loading ...