Loading ...
Loading ...
Loading ...
Page 22
PROBLEM CAUSE SOLUTION
The router does
not work.
Plug is not plugged into the
power source.
Plug the cord into the power source.
Switch is in “OFF” position. Move the switch to “ON” position.
The carbon brushes have
worn out completely.
Remove the brush caps and replace the
old brushes with new ones.
The surface of
the workpiece is
not smooth after
cutting.
The bit is dull. Change to a sharp bit.
Routing at an inappropriate
bit speed.
Select an appropriate bit speed.
Bit cannot be
installed.
Bit size is inappropriate for
the collet.
Use only 1/4” diameter bits with the 1/4”
collet; use only 1/2” diameter bits with
the 1/2” collet.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...