Loading ...
Loading ...
Loading ...
18
EN
5. While the icemaker is on, verify water leve periodically. If water pump can’t inject
water, the ice maker will stop automatically, and the [ ] symbol will ash in LCD
display window. Fill water up to the level mark and press “ON/OFF” button
two times again to turn on the unit again. Allow the refrigerant liquid inside the
compressor at least 3 minutes to settle before restarting.
6. The ice maker automatically stops working when the ice basket is full and the [ ]
symbol will display in the LCD display widow.
7. Change water in the water reservoir every 24 hours to ensure a reasonable
hygiene level. If unit isn’t in use, drain all water left in the tank.
TIMER SETTING
• Timer Delay Time Range: 0.5-19.5 hours.
• Default Delay Time: 3 hours.
• When the unit is running, you can set the unit with OFF-TIMER to let the unit stop
running after your set delay time.
• And when the unit is stopped, you can set the unit with ON-TIMER to let the unit
start to run automatically after your set delay time, then when you go back home or
have a dinner, you can enjoy the happy life that this ice-maker give to you.
How to set the timer
Press the TIMER button rst, the default “3.0H” delay time will ash in LCD display
window, then press the SELECT button to select your desired delay time. Each press
SELECT button one time, the ashing delay time will increase 0.5 hour, and if you
always press the SELECT button for mor than 3 seconds, the delay time will chang very
quickly. Then after 5 seconds ashing, the delay time digit will change from ashing to
always displaying, means the timer program has been set.
How to cancel the timer
When the unit has been set with the timer or during the timer setting process, press the
TIMER button, then the delay time digit will disappear, mean the timer set has been
cancelled.
Loading ...
Loading ...
Loading ...