Loading ...
Loading ...
Loading ...
The appliance does
not work
Unusual noises or
noisy operation
Internal temperature
too high or low
The temperature is
not cold enough
Outer surfaces are wet
Inner surfaces are wet
Standing water inside
or on the floor/worktop
The side panel heats up
Smell/odour
The doors do not close
properly
Problem Solution
Check that the appliance is turned on and thermostat is not set at 0
Check power cable is plugged in and that the fuse has not blown
Check that the voltage is correct for the appliance
Try a different socket which is known to work.
Water source or leak too near the appliance – dry surfaces thoroughly
and move the appliance
Inner surfaces are wet
Caused by condensation – dry the inside of the appliance
Door opened too often or kept open too often.
Caused by condensation – dry the inside of the appliance
Door is opened too often or kept open too long.
Check if the evaporation tray is full and empty it if required.
This is a result of the dissipation of heat from inside the cabinet.
Check the fridge contents
Check for spillages inside the appliance. Remove shelves and drawers to
check prior spills have been cleaned up.
Ensure there are no obstructions preventing door closure
Check that the door compartments and shelves are correctly in place
Check that the door seal is not warped or damaged
Check that the appliance is level.
Check that the appliance is on a flat, level surface and is stable
Check the clearance around the appliance and that it is not touching any
other items
Bubbling and gurgling sound: This noise is NORMAL and is emitted
as the coolant fluid flows through the pipes within the system
Water flowing sound: This is the NORMAL sound of water flowing
into the drain trough during the defrosting process
Noisy operation: Compressor noise is NORMAL when the
compressor is being energised.
Check thermostat – is it set too high or low?
The correct clearances are at the sides/back
The door is not being opened too often
The door is not closing completely.
Check power cable is connected and that the fuse has not blown
The wrong temperature selected. Adjust setting on the thermostat
(see page 10)
The appliance is overfilled
Appliance exposed to direct sunlight or heat source
The door is being opened too often or the door gasket is damaged
Check that the ambient temperature is within the operational limits of
the appliance.
TROUBLESHOOTING
Before returning your appliance to where you purchased it from, check the following points as
you may be able to solve any problem yourself.
HUSKY INSTRUCTION MANUAL 15
Generic all domestic models manual for Arisit 0618 v2.indd 15 11/07/2018 10:26
Loading ...