To set up your Wyze Video Doorbell:
1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Video Doorbell.
4. Tap Next.
5. Check the box to confirm that you have a screwdriver and an existing wired doorbell.
This is required to install your Wyze Video Doorbell.
6. Open the Installation Guide in a new tab. Return to this article once installation is
complete.
7. Confirm that your doorbell is flashing yellow. Tap Next.
8. No flashing yellow light? See: My doorbell is wired but not flashing yellow.
9. Tap Ready to connect.
10. If prompted by the Wyze app, allow access to your location.
11. Scan the QR code by holding the code on the screen to the doorbell.
You may have to move farther away, closer, or shift it to get it to scan.
12. When it scans, check "I heard QR code scanned" then tap Next. You'll hear "setup
completed."
o Wyze Video Doorbell doesn't scan the QR code.
13. Tap Next again, then confirm that your doorbell has a solid blue light. Tap Next.
14. Mount the device by placing the doorbell onto the wall plate matching the holes on your
doorbell. Tap Next when finished. You'll be prompted to set up your Wyze Chime.
To set up your Wyze Chime:
1. Tap Add a Wyze Chime, then tap Next to continue.
Don't want / need to add a Wyze Chime right now? Tap Not Now.
2. Plug your chime into a standard power outlet close to the doorbell.
3. Press and hold the reset button on the bottom of the Wyze Chime until the blue light
flashes quickly three times. Set up should complete automatically.
4. Tap Finish. You're all set!
