Loading ...
Loading ...
Loading ...
18
www.insigniaproducts.com
5 Grasp the roller brush at both ends and remove it by lifting it out of the
vacuum body.
6 Remove any string, hair, or other debris from the roller brush, motor pulley,
and drive belt.
7 Check the roller brush for worn areas and replace if needed.
8 Check the air passageway for obstructions and remove debris from this area, if
necessary.
9 When finished cleaning, reposition the roller brush and drive belt, then
replace the brush cover by reinstalling the six retaining screws.
10 Turn the roller brush by hand several times in the direction of the motor
pulley. If properly installed, the drive belt will align itself on the floor brush.
Loading ...
Loading ...
Loading ...