Loading ...
Loading ...
Loading ...
7077-801D • September 17, 2019
(877) 477- 4768
12
LED
Color
Number of
Flashes between
pauses
Description Notes
Green
Steady ON while
priming feed tube
(max time 2
minutes)
Feed Motor is running continuously.
(This primes the feed tube).
When priming the feed system and lling
the repot, DO NOT OVERFILL FIREPOT
FOR IGNITION. The unit will automatically
go into start up following the prime function.
Green
Steady ON while
burning
Room temperature is close to set point
and burning on lowest burnt rate.
Green 1x Unit is o and ready.
To start appliance, follow start up sequence.
Green
Blinks
Continuously
Appliance is in the start up/ignition
sequence or in shutdown.
During shut down, the blowers will shut o
when the exhaust temperature has cooled.
Green Varies
When in the automatic mode, the
number of ashes between pauses
indicates the burn rate (1 for low up to 5
for high).
Adjust the dial control to change the desired
room temperature.
Amber Steady ON
Appliance is set and running at either the
minimum or maximum power levels.
The unit will shut o only when the hopper
runs out of fuel, the user changes the
dial control to a dierent state, or the unit
senses an error.
Amber
Blinks
Continuously
Appliance is in the in
shutdown sequence.
During shut down, the blowers will shut o
when the exhaust temperature has cooled.
Red
1x
Empty Hopper Alarm
This alarm is caused by the re going
out from lack of fuel. See troubleshooting
section for more information.
Red 2x Exhaust Probe Alarm
Failed component error. See
troubleshooting section for more
information.
Red 3x Ambient Probe Alarm
Failed component error. See
troubleshooting section for more
information.
Red 4x Missed Ignition
There are a total of 2 tries per ignition
sequence. If after 2 tries there is no rise
in exhaust temperature this error will
occur. See the troubleshooting section for
additional information and correction.
Red 8x Exhaust Gas Over Temperature Alarm
The exhaust temperature exceed the
allowable limit. See the troubleshooting
section for more information and correction.
N. LED Color Coding Chart and Explanation
WARNING
Fire Risk
Do NOT operate appliance:
• With appliance door open.
• Firepot oor open.
Do NOT store fuel:
• Closer than required clearances to
combustibles to appliance
• Within space required for loading or
ash removal.
Loading ...
Loading ...
Loading ...