Loading ...
Loading ...
Loading ...
www.usaprocom.com
200025-01C
10
INSTALLATION
Figure 6 - Hood Installation
Figure 7 - Installing Gas Line and
Equipment Shutoff Valve (Model May
Vary From Illustration)
Hood
Heat
Insulation
Board
Top of Firebox
Equipment Shutoff
Valves (Install One)
Knock Out Locations
(Knock Out One Hole)
Gas Line Hole
Top
Firebox
Panel
CAUTION: Do not operate
replace without hood in place.
1. Align 3 holes in upper side of hood with
holes in heat insulation board (see Fig-
ure 6).
2. Insert screwdriver through hole in top re-
box panel to secure hood to heat insulation
board with 3 screws (see Figure 6).
INSTALLING HOOD
OPTIONAL ACCESSORY MANTEL
This rebox may be installed using a cabinet mantel accessory against a wall in your home.
The rebox and cabinet mantel can be installed directly on the oor. Follow instructions with
mantel for installation.
INSTALLING GAS LINE
WARNING: A qualied ser-
vice person must connect heater
to gas supply. Follow all local
codes.
IMPORTANT: See Connecting to Gas Supply
in your log set owner’s manual for details on
gas hookup.
You may run the gas line from either side of
the rebox (see Figure 7). Decide which side
you want to run the gas line from.
Note: This is one option for installing shutoff
valve. Check local codes for equipment shut-
off valve location requirements.
Loading ...
Loading ...
Loading ...