Loading ...
Loading ...
Loading ...
Page 19
Installation and operation manual - Atlas woodburning cookstove
ENGLISH
7.4 Location of the Certification Label
Since the information given on the certification label affixed to the appliance always overrides
the information published, in any other media (owner’s manual, catalogues, flyers, magazines
and web sites) it is important to refer to it in order to have a safe and compliant installation. In
addition, important information about the stove can be found (model, serial number, etc.). The
certification label is located on the back of the stove.
It is recommended to note the stove serial number on page 5 of this manual since it will
be needed to precisely identify the version of the appliance in the event replacement parts or
technical assistance is required. It is also recommended to register the warranty online.
8. Clearances to Combustible Materials
The clearances given in this section have been established following test results in accordance
with the procedures described in the standards ULC S627 (Canada) and UL 1482 (USA). When
this cookstove is installed respecting the indicated minimum clearances or more, the flammable
surfaces won’t overheat during normal or even abnormal usage.
None of the cookstove parts or smoke pipe can be installed closer to the combustible
materials than the minimum clearances indicated.
Fuel, solid or liquid, should not be located closer to combustibles than the minimum
clearances given.
The clearances to the combustible walls can differ slightly between Canada and the United
States and can also vary depending on the use of a single wall or double connector. Make sure
to use the proper clearances for the location and the type of pipe.
The clearances of the appliance and the flue pipes must be met individually, meaning the
appliance can not be installed closer to the combustible materials than the single or double wall
pipe allows. Refer to the following images and tables for minimum required clearances
Loading ...
Loading ...
Loading ...