Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/88028942-10036092/bg19.png)
25
EN
• Remove the plug from the wall outlet.
• Catch the ltration mesh handle and take it out.
• Clean the ltration mesh with mild detergent and softbrush.
• Make sure the ltration mesh is completed dry beforeinstalling.
Cleaning the water tank
• Remove the plug from the wall outlet.
• Pull out the water tank.
• Clean the water tank with mild detergent and soft brush.
• Put the water tank in place and x it after cleaning.
Note: Pay attention to the pump, it may fall down when pulling out the tank, please
put the pump in place before placing the tank back.
Replacement of Honeycomb Filter
• Take out the ltration mesh (Fig 1).
• Unscrew the 2 pcs screw ST2.9*14 (Fig 3).
• Replace the honeycomb lter with HEPA lter (bought from the agent only) , then
assemble the ltration mesh back, use it as air purier and air cooling fan.
pump falls down pump in place
ST2.9*14x2
Fig. 1 Fig. 2 Fig. 3
Loading ...
Loading ...
Loading ...