Loading ...
Loading ...
Loading ...
Page 15
MAINTENANCE
WARNING:
• When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage.
• To avoid serious personal injury, always
remove the battery pack from the
product when cleaning or performing
any maintenance.
• Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to damage from various
types of commercial solvents and may
be damaged by their use. Use a clean
cloth to remove dirt, dust, oil, grease,
etc.
• Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools with
compressed air.
CHUCK REPLACEMENT (FIG.12)
Chuck Jaws
FIG. 12
Mallet
Hex Wrench
The chuck can be removed and replaced
with a new one.
1. Lock the trigger switch by placing the
direction-of-rotation selector in the center
position.
2. Open the chuck jaws. Using a
screwdriver, remove the chuck screw by
turning it clockwise.
3. Insert a 5/16 in. or larger hex key into
the chuck of the drill/driver and tighten the
chuck jaws securely.
4. Tap the hex key sharply with a mallet in a
counterclockwise direction. This will loosen
the chuck for easy removal.
5. Attach a new chuck to the spindle and
tighten the chuck screw.
Loading ...
Loading ...
Loading ...