Loading ...
Loading ...
Loading ...
Page 10
OPERATION
TO INSTALL THE BELT CLIP
(FIG. 2)
1. Align the rib of the clip with the hole on
the base of the drill/driver.
2. Insert the screw and tighten the screw
securely with a screwdriver (not included).
The belt clip can be positioned on either
side of the tool.
TO REMOVE THE BELT CLIP
(FIG. 2)
1. Use a screwdriver (not included) to
loosen the screw that attaches the belt clip
to the drill/driver.
2. Remove the screw and the belt clip.
Keep them in a safe place for future use.
FIG. 2
TO STORE THE BIT (FIG. 3)
FIG. 3
Your drill/driver is equipped with a bit
holder on the heel of the tool. After using
the bit, you can insert the bit into the bit
holder for convenient storage.
LED WORKLIGHT (FIG. 4)
FIG. 4
The LED worklight, located on the base
of the drill/driver, will illuminate when the
trigger switch is depressed before the drill/
driver is running. This provides additional
light on the surface of the workpiece. The
light will automatically turn off within 10
seconds after releasing the trigger.
VARIABLE-SPEED TRIGGER
SWITCH (FIG. 5)
FIG. 5
Variable-Speed
Trigger Switch
Belt Clip
Screw
Bit Holder
Bit
LED Worklight
Loading ...
Loading ...
Loading ...