Loading ...
Loading ...
Loading ...
Page 12
CAUTION
Do not let brake
fluids, gasoline, petroleum-based materi-
als touch the plastic parts. Chemicals can
cause damage to the plastic, and make the
plastic unserviceable.
CAUTION
Do not use strong
solvents or detergents on the plastic
housing or components.
CAUTION
Remove the battery
pack from the machine before maintenance.
REPLACE THE GUIDE BAR AND
THE CHAIN
1. Loosen the chain cover by turning the
chain cover knob counterclockwise.
2. Remove the chain cover.
FIG. 9
Chain Cover Knob
3. Put the chain drive links into the bar
groove.
4. Put the chain cutters in the direction of
the chain operation.
5. Put the chain in position and make sure
that the loop is behind the guide bar.
FIG. 10
Chain Cutter
Bar Groove
Chain Drive Link
MAINTENANCE
6. Hold the chain and bar.
7. Put the chain loop around the sprocket.
8. Make sure the chain tension pin hole on
the guide bar ts correctly with the bolt.
Sprocket
Chain Tension
Pin Hole
FIG. 11
9. Install the chain cover.
10. Tighten the chain. Refer to Adjust the
chain tension.
FIG. 12
11. Tighten the chain cover knob when the
chain is correctly tensioned.
NOTE: If you start the chain saw with a new
chain, have a test for 2-3 minutes. A new
chain gets longer after the rst use, examine
the tension and tighten the chain if necessary.
Loading ...
Loading ...
Loading ...