259-5170
Roadhouse Fire Table
Model#SRFP96
Instructions Manual
1-YEAR LIMITED WARRANTY
This appliance has been manufactured under the highest standards of quality and workmanship.
Shinerich Industrial Ltd warrants, to the original consumer/purchaser, that all aspects of this
product will be free of defects in material and workmanship for one (1) year from the date of
purchase shown on the purchaser’s receipt. Please retain your sales receipt as proof of
purchase might be required or requested. This limited warranty shall be limited to the
replacement of parts, which prove defective under normal use and service and which Shinerich
Industrial determines, at their reasonable discretion, to be defective. A replacement for any
defective part will be supplied free of charge for installation by the consumer.
This limited warranty does not cover defects or damage caused by over-heating, modification,
abuse, improper use, installation, storage or maintenance. The limited warranty also does not
cover damage due to shipment or poor handling. Shinerich Industrial Ltd will not be responsible
for labor charges and/or damage incurred in installation, repair or replacement, nor for incidental
or consequential damage. This limited warranty also does not cover damage or defect caused
by failure to perform routine maintenance, as described within the assembly/instruction manual.
Inaddition,thelimitedwarrantydoesnotcoverdamagetothefinish,suchasscratches,dents,
discoloration, rust or other weather damage, after purchase.
Shinerich Industrial is not responsible for local codes nor if any of our products are not approved
for installation. Please check with your local building department or governing agencies for
proper approvals before purchasing/installing. Shinerich Industrial Ltd is not responsible for the
actions including negligence of the installer.
This warranty specifically excludes liability for indirect, incidental, or consequential damages.
Some states do not allow the exclusions or limitation of incidental or consequential damages; so
the above exclusion may not apply to you. This warranty gives you specific legal rights, and you
may have other rights that vary from state to state.
1-888-909-3888
888.909.3888
Monday - Friday, 7:30 am to 4:30 pm PST
.us
WARNINGS................................................................................................2
PARTS LIST................................................................................................4
ASSEMBLY..............................................................................................5-9
OPERATION.......................................................................................10-13
LIGHTING, TENDING & EXTINGUISHING A FIRE..............................10
CLEANING & STORAGE......................................................................11
GRILLING.........................................................................................11-12
1-YEAR LIMITED WARRANTY...............................................................14
WARNINGS
WARNING
!
FOR OUTDOOR USE ONLY.
WARNING
!
Improper installation, adjustment, alteration, service, or maintenance1.
may result in property damage, injury or death.
Read the installation, operation, maintenance instructions thoroughly2.
before installing or servicing this equipment.
Failure to follow these instructions could result in a fi re or explosion,3.
which could cause property damage, personal injury or death.
Save these instructions for future reference. If you are assembling this fi re pit for someone
else, give this manual to him or her to save for future reference.
WARNING
FOR YOUR SAFETY
This item is for OUTDOOR use only, and shall NOT be used in a building, garage or any1.
other enclosed area.
DO NOT use this fi re pit for indoor heating. TOXIC carbon monoxide fumes can2.
accumulate and cause asphyxiation.
This fi re pit is NOT for commercial use.3.
This fi re pit is NOT to be operated by children.4.
This fi re pit is NOT to be used in or on boats or recreational vehicles.5.
Always use in accordance with all applicable local, state and national codes. Contact6.
your local fi re department for details on outdoor burning.
When using this fi re pit, exercise the same precautions you would with any open fi re.7.
The use of alcohol, prescription or non-prescription drugs may impair the consumer’s8.
ability to properly assemble or safely operate this fi re pit.
Do NOT use this fi re pit without reading this entire document and all WARNINGS,9.
cautions and instructions.
This fi re pit is for use with dry, seasoned hardwood. It will burn hotter, more completely10.
and create less smoke.
Do NOT burn charcoal briquette, lump charcoal, manufactured logs, driftwood, trash,11.
leaves, papers, cardboard, plywood, painted or stained or pressure treated wood.
Do NOT alter this fi re pit in any manner.12.
Do NOT use this fi re pit until it is COMPLETELY assembled and all parts are securely13.
fastened and tightened.
Do NOT store or use gasoline or other fl ammable vapors or liquids in the vicinity of this14.
or any other appliance.
Do NOT store or use an LP gas cylinder within 10 feet (3.05m) of this fi re pit while it is in15.
operation.
2
OPERATION
CLEANING
STORAGE
Routinely clean and inspect the fi re pit to extend the product life and maintain safe operating
conditions.
DO NOT attempt to clean the fire pit until it has properly and completely cooled
DO NOT clean the fi re pit while an active fi re or smoulder embers are present.
DO NOT use abrasive chemicals or oven cleaner as this could damage the paint fi nish.
1. Remove leftover coals and ash using a fi re place scoop or shovel (or handheld garden
shovel).
2. Rinse the fi re bowl and dump the water.
3. Wash the exterior surfaces using a mild dish washing detergent. A brush might be required
to help scrub some stains.
4. Rinse all surfaces and allow to dry or towel dry.
DO NOT move or store this fire pituntil the fire is out and it has completely cooled.
1. Once the coals are cold (no longer burning or smoldering) and the fi re pit has cooled,
remove and properly dispose of the ashes.
2. Move and store the fi re pit in a dry location.
Always store the fi re pit in a location out of reach of children and pets.
To help maximize the product life, keep the fi re pit stored in a dry location or covered from
weathering elements (rain, snow, etc).
GRILLING
If desired, this fire pit can be used to grill food using the cooking grid attachment.To do so,
prepare a suitable fire for cooking and position the cooking grid at a desired height.The grid
can swivel to access the fire or to move food away from the fire or heat.
WARNING
!
ALWAYS USE BARBECUE MITTS WHEN MOVING COOKING GRID. DO1.
NOT TOUCH THE COOKING GRID OR FIRE PIT WITHOUT PROTECTION.
DO NOT USE WATER TO EXTINGUISH A FIRE.2.
11
OPERATION
LIGHTING INSTRUCTIONS
1. Begin with a clean/empty fi re bowl.
2. Build a layer of dry kindling on the center of the grate, or place a natural fi re starter.
3. Place dry, seasoned hardwood onto the grate by stacking around and over the starting
layer. Make certain the length of the wood is less than 3/4 the diameter of the fi re bowl.
4. Light the kindling or fi re starter using a match.
TENDING A FIRE
Once the fi re wood is burning, you may need to shift the wood to enhance the fi re as well
as add more fi re wood to create your desired fi re.
Using long handled fi re pit tools (tongs or poker), move the fi re wood and coals as needed
to allow airfl ow for more suffi cient burning.
DO NOT add fl ammable liquids (gasoline, diesel, kerosene, lighter fl uid or alcohol) to a
hot/lit fi re. If the fl ames burn out, enhance the fi re by adding kindling and more seasoned
hardwood. If additional wood is required, carefully place it on top of coals.
EXTINGUISHING A FIRE
If possible, allow a fi re to burn itself out. However, DO NOT leave a fi re unattended.
DO NOT use water to extinguish a fi re. This could result in injury from burner embers. It
could also damage the fi re pit.
Using fi re pit tools, spread coals/embers to allow them to burn out completely. DO NOT
attempt to move or dump the fi re pit until the fi re is out and the fi re pit has cooled.
Routinely clean and inspect the fi re pit to extend the product life and maintain safe
operating conditions.
DO NOT inspect or performance maintenance until the fi re pit has completely cooled.
Inspect all components and connections for signs of damage or corrosion. If corrosion is
found, remove as much corrosion as possible using a wire brush. Then repaint using paint
made for high temperature applications. If any hardware is corroded, replace with new
parts before next use.
NOTE: It is normal for the paint to discolor or burn off after repeated usage. To properly
maintain the fi re pit, remove excise corrosion and apply high temperature resistant paint.
MAINTENANCE
10
WARNINGS
Do NOT use this fi re pit near automobiles, trucks, vans or recreational vehicles.16.
Do NOT use in an explosive atmosphere. Keep outdoor area clean and free from 17.
combustible materials, gasoline and other fl ammable liquids.
Do NOT use this fi re pit under an overhead or near any unprotected combustible 18.
constructions. Avoid using near or under overhanging trees and shrubs.
Always use this fi re pit on a hard level non-combustible surface such as concrete, rock 19.
or stone. An asphalt or blacktop surface may not be acceptable for this purpose. Do
NOT use on wooden decks.
Always empty this fi re pit before each use.20.
Do NOT wear fl ammable or loose clothing when operating this fi re pit.21.
Do NOT use in windy conditions.22.
Do NOT use gasoline, kerosene, diesel fuel, or lighter fl uid to start a fi re or enhance an 23.
existing fi re.
Keep all electrical cords away from a hot fi re pit.24.
All surfaces of this fi re pit are hot when in operation. To avoid burns, do NOT touch fi re 25.
pit until it has completely cooled unless you are wearing protective gear (gloves, BBQ
mittens, pot holders, hot pads, etc). Never touch ashes or coals to see if they are hot.
Do NOT leave a lit fi re pit unattended, especially around children and pets.26.
Do NOT attempt to move or store this fi re pit until ashes and coals are completely 27.
extinguished.
Do NOT remove ashes or coals until they are completely extinguished.28.
Use heat-resistant gloves or hot pads when contacting handles.29.
Use long, sturdy fi re pit tools when adding or moving logs.30.
Do NOT place wood directly into bottom of the fi re pit. Place wood only on the wood 31.
grid.
Do NOT overload the fi re pit. Do not add additional fi rewood until the fi re burns down.32.
Do NOT lean over this fi re pit when lighting or when in use.33.
Do NOT place hot fi re pit tools onto combustible surface such as grass, wooden deck or 34.
furniture.
Avoid breathing smoke from the fi re and avoid getting it into your eyes.35.
This fi re pit should be thoroughly inspected and cleaned on a regular basis.36.
After a period of storage and/or non-use, check for signs of damage and creosote build-37.
up. Do NOT operate until necessary repairs and/or clean-up is executed.
Death, serious injury or property damage may occur if the above is not followed exactly.38.
WARNING
!
This product can expose you to chemicals including soot, which
is known in the State of California to cause cancer, and carbon
monoxide, which is known to the State of California to cause birth
defects or other reproductive harm. For more information, go to:
www.P65Warnings.ca.go.
3
PARTS LIST
PART DESCRIPTION QTY
A SWING HANDLE 1
B LIFT HANDLE 1
C GRID ASSEMBLY 1
D L PIN 1
E TABLE ASSEMBLY 4
F FIRE BOWL 1
G LOWER TUBE ASSEMBLY 4
H LEG 4
A
B
C
D
E
F
G
H
TOOLS REQUIRED:
#2 Phillips Head Screwdriver (not included)
Adjustable Wrench (not included)
HARDWARE DESCRIPTION IMAGE QUANTITY
AA M6 X 14 BOLT 30
BB M5 X 12 BOLT 6
CC M6 X 20 BOLT 4
DD M6 NUT 6
EE WING BOLT 4
4
ASSEMBLY
7
FINAL ASSEMBLY VIEWS
9
ASSEMBLY
6
D
8
ASSEMBLY
1
NOTE: Use a suitable, non-abrasive surface during assembly to avoid damaging the paint.
HARDWARE REQUIRED:
AA M6 x 14 BOLT, 12 PCS
2
H
F
AA
HARDWARE REQUIRED:
AA M6 x 14 BOLT, 16 PCS
NOTE:
DO NOT tighten hardware until all
(4) Lower Tube Assembly pieces
are installed.
G
AA
5
HARDWARE REQUIRED:
BB M5 x 12 BOLT, 4 PCS
HARDWARE REQUIRED:
CC M6 x 20 BOLT, 4 PCS
DD M6 NUT, 4 PCS
EE WING BOLT, 4 PCS
3
BB
ASSEMBLY
4
E
EE
6
4
5
HARDWARE REQUIRED:
BB M5 x 12 BOLT, 2 PCS
AA M6 x 14 BOLT, 2 PCS
DD M6 NUT, 2 PCS
BB
DD
AA
BOTTOM VIEW
CC
DD
BOTTOM VIEW
ASSEMBLY
7
HARDWARE REQUIRED:
BB M5 x 12 BOLT, 4 PCS
HARDWARE REQUIRED:
CC M6 x 20 BOLT, 4 PCS
DD M6 NUT, 4 PCS
EE WING BOLT, 4 PCS
3
BB
ASSEMBLY
4
E
EE
6
4
5
HARDWARE REQUIRED:
BB M5 x 12 BOLT, 2 PCS
AA M6 x 14 BOLT, 2 PCS
DD M6 NUT, 2 PCS
BB
DD
AA
BOTTOM VIEW
CC
DD
BOTTOM VIEW
ASSEMBLY
7
ASSEMBLY
6
D
8
ASSEMBLY
1
NOTE: Use a suitable, non-abrasive surface during assembly to avoid damaging the paint.
HARDWARE REQUIRED:
AA M6 x 14 BOLT, 12 PCS
2
H
F
AA
HARDWARE REQUIRED:
AA M6 x 14 BOLT, 16 PCS
NOTE:
DO NOT tighten hardware until all
(4) Lower Tube Assembly pieces
are installed.
G
AA
5
PARTS LIST
PART DESCRIPTION QTY
A SWING HANDLE 1
B LIFT HANDLE 1
C GRID ASSEMBLY 1
D L PIN 1
E TABLE ASSEMBLY 4
F FIRE BOWL 1
G LOWER TUBE ASSEMBLY 4
H LEG 4
A
B
C
D
E
F
G
H
TOOLS REQUIRED:
#2 Phillips Head Screwdriver (not included)
Adjustable Wrench (not included)
HARDWARE DESCRIPTION IMAGE QUANTITY
AA M6 X 14 BOLT 30
BB M5 X 12 BOLT 6
CC M6 X 20 BOLT 4
DD M6 NUT 6
EE WING BOLT 4
4
ASSEMBLY
7
FINAL ASSEMBLY VIEWS
9
OPERATION
LIGHTING INSTRUCTIONS
1. Begin with a clean/empty fi re bowl.
2. Build a layer of dry kindling on the center of the grate, or place a natural fi re starter.
3. Place dry, seasoned hardwood onto the grate by stacking around and over the starting
layer. Make certain the length of the wood is less than 3/4 the diameter of the fi re bowl.
4. Light the kindling or fi re starter using a match.
TENDING A FIRE
Once the fi re wood is burning, you may need to shift the wood to enhance the fi re as well
as add more fi re wood to create your desired fi re.
Using long handled fi re pit tools (tongs or poker), move the fi re wood and coals as needed
to allow airfl ow for more suffi cient burning.
DO NOT add fl ammable liquids (gasoline, diesel, kerosene, lighter fl uid or alcohol) to a
hot/lit fi re. If the fl ames burn out, enhance the fi re by adding kindling and more seasoned
hardwood. If additional wood is required, carefully place it on top of coals.
EXTINGUISHING A FIRE
If possible, allow a fi re to burn itself out. However, DO NOT leave a fi re unattended.
DO NOT use water to extinguish a fi re. This could result in injury from burner embers. It
could also damage the fi re pit.
Using fi re pit tools, spread coals/embers to allow them to burn out completely. DO NOT
attempt to move or dump the fi re pit until the fi re is out and the fi re pit has cooled.
Routinely clean and inspect the fi re pit to extend the product life and maintain safe
operating conditions.
DO NOT inspect or performance maintenance until the fi re pit has completely cooled.
Inspect all components and connections for signs of damage or corrosion. If corrosion is
found, remove as much corrosion as possible using a wire brush. Then repaint using paint
made for high temperature applications. If any hardware is corroded, replace with new
parts before next use.
NOTE: It is normal for the paint to discolor or burn off after repeated usage. To properly
maintain the fi re pit, remove excise corrosion and apply high temperature resistant paint.
MAINTENANCE
10
WARNINGS
Do NOT use this fi re pit near automobiles, trucks, vans or recreational vehicles.16.
Do NOT use in an explosive atmosphere. Keep outdoor area clean and free from 17.
combustible materials, gasoline and other fl ammable liquids.
Do NOT use this fi re pit under an overhead or near any unprotected combustible 18.
constructions. Avoid using near or under overhanging trees and shrubs.
Always use this fi re pit on a hard level non-combustible surface such as concrete, rock 19.
or stone. An asphalt or blacktop surface may not be acceptable for this purpose. Do
NOT use on wooden decks.
Always empty this fi re pit before each use.20.
Do NOT wear fl ammable or loose clothing when operating this fi re pit.21.
Do NOT use in windy conditions.22.
Do NOT use gasoline, kerosene, diesel fuel, or lighter fl uid to start a fi re or enhance an 23.
existing fi re.
Keep all electrical cords away from a hot fi re pit.24.
All surfaces of this fi re pit are hot when in operation. To avoid burns, do NOT touch fi re 25.
pit until it has completely cooled unless you are wearing protective gear (gloves, BBQ
mittens, pot holders, hot pads, etc). Never touch ashes or coals to see if they are hot.
Do NOT leave a lit fi re pit unattended, especially around children and pets.26.
Do NOT attempt to move or store this fi re pit until ashes and coals are completely 27.
extinguished.
Do NOT remove ashes or coals until they are completely extinguished.28.
Use heat-resistant gloves or hot pads when contacting handles.29.
Use long, sturdy fi re pit tools when adding or moving logs.30.
Do NOT place wood directly into bottom of the fi re pit. Place wood only on the wood 31.
grid.
Do NOT overload the fi re pit. Do not add additional fi rewood until the fi re burns down.32.
Do NOT lean over this fi re pit when lighting or when in use.33.
Do NOT place hot fi re pit tools onto combustible surface such as grass, wooden deck or 34.
furniture.
Avoid breathing smoke from the fi re and avoid getting it into your eyes.35.
This fi re pit should be thoroughly inspected and cleaned on a regular basis.36.
After a period of storage and/or non-use, check for signs of damage and creosote build-37.
up. Do NOT operate until necessary repairs and/or clean-up is executed.
Death, serious injury or property damage may occur if the above is not followed exactly.38.
WARNING
!
This product can expose you to chemicals including soot, which
is known in the State of California to cause cancer, and carbon
monoxide, which is known to the State of California to cause birth
defects or other reproductive harm. For more information, go to:
www.P65Warnings.ca.go.
3
WARNINGS
WARNING
!
FOR OUTDOOR USE ONLY.
WARNING
!
Improper installation, adjustment, alteration, service, or maintenance1.
may result in property damage, injury or death.
Read the installation, operation, maintenance instructions thoroughly2.
before installing or servicing this equipment.
Failure to follow these instructions could result in a fi re or explosion,3.
which could cause property damage, personal injury or death.
Save these instructions for future reference. If you are assembling this fi re pit for someone
else, give this manual to him or her to save for future reference.
WARNING
FOR YOUR SAFETY
This item is for OUTDOOR use only, and shall NOT be used in a building, garage or any1.
other enclosed area.
DO NOT use this fi re pit for indoor heating. TOXIC carbon monoxide fumes can2.
accumulate and cause asphyxiation.
This fi re pit is NOT for commercial use.3.
This fi re pit is NOT to be operated by children.4.
This fi re pit is NOT to be used in or on boats or recreational vehicles.5.
Always use in accordance with all applicable local, state and national codes. Contact6.
your local fi re department for details on outdoor burning.
When using this fi re pit, exercise the same precautions you would with any open fi re.7.
The use of alcohol, prescription or non-prescription drugs may impair the consumer’s8.
ability to properly assemble or safely operate this fi re pit.
Do NOT use this fi re pit without reading this entire document and all WARNINGS,9.
cautions and instructions.
This fi re pit is for use with dry, seasoned hardwood. It will burn hotter, more completely10.
and create less smoke.
Do NOT burn charcoal briquette, lump charcoal, manufactured logs, driftwood, trash,11.
leaves, papers, cardboard, plywood, painted or stained or pressure treated wood.
Do NOT alter this fi re pit in any manner.12.
Do NOT use this fi re pit until it is COMPLETELY assembled and all parts are securely13.
fastened and tightened.
Do NOT store or use gasoline or other fl ammable vapors or liquids in the vicinity of this14.
or any other appliance.
Do NOT store or use an LP gas cylinder within 10 feet (3.05m) of this fi re pit while it is in15.
operation.
2
OPERATION
CLEANING
STORAGE
Routinely clean and inspect the fi re pit to extend the product life and maintain safe operating
conditions.
DO NOT attempt to clean the fire pit until it has properly and completely cooled
DO NOT clean the fi re pit while an active fi re or smoulder embers are present.
DO NOT use abrasive chemicals or oven cleaner as this could damage the paint fi nish.
1. Remove leftover coals and ash using a fi re place scoop or shovel (or handheld garden
shovel).
2. Rinse the fi re bowl and dump the water.
3. Wash the exterior surfaces using a mild dish washing detergent. A brush might be required
to help scrub some stains.
4. Rinse all surfaces and allow to dry or towel dry.
DO NOT move or store this fire pituntil the fire is out and it has completely cooled.
1. Once the coals are cold (no longer burning or smoldering) and the fi re pit has cooled,
remove and properly dispose of the ashes.
2. Move and store the fi re pit in a dry location.
Always store the fi re pit in a location out of reach of children and pets.
To help maximize the product life, keep the fi re pit stored in a dry location or covered from
weathering elements (rain, snow, etc).
GRILLING
If desired, this fire pit can be used to grill food using the cooking grid attachment.To do so,
prepare a suitable fire for cooking and position the cooking grid at a desired height.The grid
can swivel to access the fire or to move food away from the fire or heat.
WARNING
!
ALWAYS USE BARBECUE MITTS WHEN MOVING COOKING GRID. DO1.
NOT TOUCH THE COOKING GRID OR FIRE PIT WITHOUT PROTECTION.
DO NOT USE WATER TO EXTINGUISH A FIRE.2.
11
WARNINGS................................................................................................2
PARTS LIST................................................................................................4
ASSEMBLY..............................................................................................5-9
OPERATION.......................................................................................10-13
LIGHTING, TENDING & EXTINGUISHING A FIRE..............................10
CLEANING & STORAGE......................................................................11
GRILLING.........................................................................................11-12
1-YEAR LIMITED WARRANTY...............................................................14
OPERATION
Always keep raw meats separate from cooked food and DO NOT reuse serving dishes, plates
or utensils that have touched raw meats.
Use separate cooking tools for handling raw meat and cooked meat, even while grilling.
Defrost meats in a refrigerator. Do not allow meats to thaw at room temperature.
Thoroughly wash all dishes, plates and cooking utensils with warm soapy water.
Always wash your hands thoroughly with warm soapy water after handling raw meat or
utensils that have been in contact with raw meats.
FOOD SAFETY
13
259-5170
Roadhouse Fire Table
Model#SRFP96
Instructions Manual
1-YEAR LIMITED WARRANTY
This appliance has been manufactured under the highest standards of quality and workmanship.
Shinerich Industrial Ltd warrants, to the original consumer/purchaser, that all aspects of this
product will be free of defects in material and workmanship for one (1) year from the date of
purchase shown on the purchaser’s receipt. Please retain your sales receipt as proof of
purchase might be required or requested. This limited warranty shall be limited to the
replacement of parts, which prove defective under normal use and service and which Shinerich
Industrial determines, at their reasonable discretion, to be defective. A replacement for any
defective part will be supplied free of charge for installation by the consumer.
This limited warranty does not cover defects or damage caused by over-heating, modification,
abuse, improper use, installation, storage or maintenance. The limited warranty also does not
cover damage due to shipment or poor handling. Shinerich Industrial Ltd will not be responsible
for labor charges and/or damage incurred in installation, repair or replacement, nor for incidental
or consequential damage. This limited warranty also does not cover damage or defect caused
by failure to perform routine maintenance, as described within the assembly/instruction manual.
Inaddition,thelimitedwarrantydoesnotcoverdamagetothefinish,suchasscratches,dents,
discoloration, rust or other weather damage, after purchase.
Shinerich Industrial is not responsible for local codes nor if any of our products are not approved
for installation. Please check with your local building department or governing agencies for
proper approvals before purchasing/installing. Shinerich Industrial Ltd is not responsible for the
actions including negligence of the installer.
This warranty specifically excludes liability for indirect, incidental, or consequential damages.
Some states do not allow the exclusions or limitation of incidental or consequential damages; so
the above exclusion may not apply to you. This warranty gives you specific legal rights, and you
may have other rights that vary from state to state.
1-888-909-3888
888.909.3888
Monday - Friday, 7:30 am to 4:30 pm PST
.us
