Loading ...
Loading ...
Loading ...
7
Dry ironing
To use your steam generator as a dry iron only,
follow steps 2 and 3 of ‘Using the Steam
G
enerator’ on pages 5 and 6. You do not need to
put water in the tank or select a steam level.
Steam function
During steaming, small amounts of water may be
e
jected from the soleplate
(
6)
.
This is normal and
can be avoided by
only
using
the iron when it is
at the correct temperature (the temperature
indicator light (9) on the iron (5) goes out when
ready).
Sudden jolts of the boiler unit can also cause
water droplets on the soleplate; therefore, do not
move the base unit during ironing.
Vertical steam
Vertical steam is useful for removing creases
f
rom hanging clothes, curtains, upholstery, etc.
H
old the iron
(
5)
b
etween 1cm and 2cm away
from the item and press and hold the steam
t
rigger
(
3)
f
or vertical steam.
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
Features
3
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate (6), set
the iron at the MAX position and pass it over a clean
piece of cotton to draw the deposit off the surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Replacing the anti-scale filter
The anti-scale filter is designed to reduce the
build-up of limescale which occurs during steam
ironing. This will prolong the working life of your
iron. However, please note that the anti-scale filter
will not completely stop the natural process of
limescale build-up.
How often you need to replace the anti-scale filter
depends on how often you use your iron with its
steam functions and how ‘hard’ your water supply
is. Water hardness varies greatly from one area to
another. For advice on the relative hardness of your
water, contact your local water supplier.
If you iron more or less frequently, then you should
alter the interval between refills accordingly.
To obtain replacement anti-scale refills, telephone
our spares number on: 0344 873 0710.
If a new re-fill is not available, you may continue
operating the appliance but scale will build up in
the system. Replace the anti-scale refill as soon
as possible.
1 Disconnect the appliance from the mains outlet.
2 Slide out the tank and remove the anti-scale filter.
3 Pull the plate from the end of the filter A.
4 Remove the foam pad B and slide out the spent
anti-scale sleeve
C.
5 Place the refill into the filter, reposition the foam
pad and clip the plate onto the filter, making sure
it locks in position.
6 Connect the appliance to the mains supply and
switch on.
7 Replace the water tank (1). The unit is now ready
to use or store.
Allow the appliance to cool.
Remove the detachable water tank
(1) and empty
it. Once the water tank is empty, re-attach it to
the base unit
(8).
WARNING: Do not pull too tightly on the steam
supply cord or on the cable support when looping
the power cord and steam supply cord. Damage to
cables caused by wrapping too tightly will not be
covered by the
guarantee.
Maintenance
Emptying and storing
ABC
RN333024 MUK Rev1.qxp_IB 21/04/2020 17:00 Page 7
Loading ...