Loading ...
Loading ...
Loading ...
14
EN
BREWING FILTER COFFEE
1
Open the lid of the water tank and pour clean drinking water into the
designated container according to the capacity.
2
Add coffee powder to the nylon lter with a spoon. A coated spoon usually
makes a rst-class cup of coffee. You can also customize coffee powder to
your taste, of course.
3
Close the lid and connect the device to the power supply. The display will
show [12:00].
4
Insert the nylon lter in the lter holder.
5
Slide the carafe onto the hotplate. Make sure to align the centerlines of the
carafe and the lter holder.
6
The display will show [12:00]. Press the ON / OFF button once, the red
indicator will light up and the coffee will automatically start brewing after a
while. Note: you can also remove the carafe during operation to pour a cup
of coffee in advance. However, the carafe should be returned to the hotplate
within 30 seconds to prevent coffee from owing over the edge of the lter
holder.
TIME AND AUTOMATIC START
Note: This function is only relevant for the preparation of lter coffee.
The device has a programming function:
1
Press the PROG button. You can now set the current time.
2
When the display shows CLOCK, press the HOUR and MIN buttons to set the
current time from 0:00 to 23:59.
3
When the display shows TIMER, press the HOUR and MIN buttons to set the
preset time from 0:00 to 23:59 for automatic operation.
4
Select the intensity of the coffee by pressing the MODE button and selecting
1bean,
, 2 beans 3 beans .
Loading ...
Loading ...
Loading ...