Loading ...
Loading ...
Loading ...
Page 10
6. ADJUSTABLE DEPTH GAUGE(SEE FIG
D).
Fit the drill bit into the chuck. Loosen the
depth gauge (2) by rotating the handle grip
counter -clockwise. Slide the depth gauge
until the distance between the depth gauge
end and the drill/driver bit end is equal to
the depth of hole you wish to make. Then
clamp the depth gauge by rotating the handle
clockwise.
7. MOUNTING OF BIT IN CHUCK (SEE FIG
E).
When mounting the drill bit, insert bit between
the chuck jaws as far as it will go. Ensure drill
bit is in the centre of the chuck jaws. Using
the chuck key provided, there are three holes
in which the chuck key should be inserted.
Tighten at all three holes, not just one. Your
drill bit is now locked in the chuck. The bit
can be removed by reversing the above
procedure.
WARNING
Before installing accessory,
remove plug from power supply. Do not
attempt to tighten drill bits (or any other
accessory) by gripping the front part of the
chuck and turning the tool on. Damage to the
chuck and personal injury may result.
OPERATION
Fig. C
4
5
Fig. A
Fig. B
Fig. D
Fig. E
Fig. C
4
5
Fig. A
Fig. B
Fig. D
Fig. E
Loading ...
Loading ...
Loading ...